0
There are instruction for "Training HomeLink" which has a fairly complex in its thoroughness but appears quite simple to follow. We shall see.
To erase any previously learned codes before training the first button, press and hold the two outside buttons on the HomeLink transceiver for about 20 seconds until the red indicator flashes. Then release the buttons.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
'How do you program your Honda odyssey garage door opener'?
Look in your manual
Home to program garage door opener to Honda Ridgeline?
program garage door opener for honda ridgeline
How do I program my Honda Odyssey garage door opener?
New Car: Erase previous codes by pressing and holding two outside buttons for 20 s until red light flashes. Release buttons, proceed to step 1. 1. Unplug garage door opener from house current. 2. Hold garage door opener remote control 2 - 5 in from HomeLink keeping red light in view. 3. Select Homelink button you want to train. 4. Press and hold the button on the remote control and the button on the HomeLink at the same time and keep holding both buttons down. Canadian owners may have to press and release the remote unit every 2 seconds to keep the remote transmitting. 5. The red light on the HomeLink will begin flashing, slowly at first then rapidly. 6. When the red light flashes rapidly, release both buttons. 7. Plug in the garage door motor and test the the HomeLink transmitter by holding down the button you programmed. The door should operate. If it does not, then you may have a variable or rolling code garage door opener. Test this by holding the HomeLink transmitter button you just trained. If the red light blinks for two s then stays on, lucky you, you have a rolling code garage door opener. Not to worry, see below for Plan B! 8. Repeat the steps to train the other buttons on the HomeLink. TRAINING WITH A ROLLING CODE SYSTEM aka Plan B. 1. Complete steps 1-8 above first. 2. Find the 'Training Button' on the garage door opener unit. This may be on the back of the motor, or some units may allow training to be initiated from the wired remote unit in the garage itself. 3. Press and hold the training button on the garage door opener unit (or equivalent action as per the opener instructions). The light may blink or come on and stay on. You now have 30 s or so to press and hold the HomeLink button for 3-4 s (the very same button you trained above in steps 1-8) This should result in a signal of some sort from the garage door opener unit...the training light could turn off, the light on the opener could blink, etc. You may have to press the HomeLink button 3 or 4 times for the unit to recognize the HomeLink system. 4. Press the Homelink button again, the garage door system should operate!
What are the buttons for near the map lights on a 2000 Honda accord ex coupe?
Buttons to be used as a garage door opener. They must be programmed to your opener.
How do you program the garage door opener in the 2001 Honda Accord?
According to the Owners manual, for a 2000 Accord LX, (2001?),page 84-86. You must have a garage door remote control! Press the desired key to use on the Honda panel and the remote key. The Honda panel red light will begin to flash slowly at first, then rapidly. The key code should now be learned by the Honda transmitter, and open/close the door. To expand on this you can hold the first and third buttons on the HomeLink transmitter for your car to erase any old codes that are stored in the transmitter. Hold the first and third buttons for at least thirty seconds, or until the LED light in the HomeLink symbol stops flashing and stays on solid. You can find out more for your particular model and year of car on the HomeLink website located here: http://www.homelink.com/programming/programming.taf
Does the 2009 Honda Civic have a garage door opener?
My 2009 4 Door Civic EX-L does not have a garage door opener. I should say that I am very pleased with the car. It's very smooth and peppy - fun to drive!
Is the Honda Odyssey an SUV?
No, the Honda Odyssey is a minivan.
How do you program the garage door opener in a Honda accord 1998?
Here's what I found on www.homelink.com which makes the technology for the garage door openers in Honda's. BTW, the instruction worked for my 2000 Accord: First time programming 1. For first time training, press and hold the two outer HomeLink buttons, releasing only when the HomeLink indicator light begins to flash after 20 seconds.(Do not perform this step when training the additional HomeLink buttons.) 2. Position the hand-held transmitter 1-3 inches away from the HomeLink surface (located on your overhead), keeping the HomeLink indicator light in view. 3. Using both hands, simultaneously press and hold both the desired HomeLink button and hand held transmitter button. DO NOT release until the HomeLink indicator light flashes slowly and then rapidly. When the indicator light flashes rapidly, both buttons may be released.(The rapid flashing indicates successful training.) Note: Some garage door openers may require you to replace step 3 with the "cycling" procedure noted in the "View Canadian Instructions" section. 4. Press and hold the trained HomeLink button and observe the indicator light. * If the indicator light is solid/continuous, training is complete and your device should activate when the HomeLink button is pressed and released. * If the indicator light blinks rapidly for 2 seconds and then turns a solid/continuous light, proceed with the following training instructions for a rolling code device. A second person may make the following steps quicker and easier. Please use a ladder or other device. Do not stand on your vehicle to perform the next steps. 5. At the garage door opener receiver (motorhead unit) in the garage, locate the "learn" or "smart" button (usually near where the hanging antenna wire is attached to the unit). If there is difficulty locating the training button, reference the garage door opener's manual or contact us. 6. Press and release the "learn" or "smart" button (the name and color of the button may vary by manufacturer). NOTE: Once the button is pressed, there are 30 seconds in which to initiate the next step. 7. Return to the vehicle and firmly press and hold the trained HomeLink button for two seconds and release. Repeat the "press/hold/release" sequence up to 3 times to complete the training process.
How do you download a 1998 Honda Accord owner's manual?
im looking to reset my garage door opener remote in my 1998 Honda accord ex - on the overhead console.... I don't have an owners manual
How is Honda odyssey related to the greek mthyology odyssey?
Honda odyssey gets its name from the Greeks
Where do you find owner2002 Honda Odyssey owners manual?
honda odyssey
How fast can a Honda Odyssey go?
how fast does a Honda odyssey go
