Same as the 2009 model:
1.Turn ignition on with engine off.
2. Press gas pedal to the floor three times,
3. Cycle key off and on.
How do you reset maint read light on 2010 corolla
The oil change light is reset by Key on, engine off. Press the gas pedal to the floor three times. Cycle key off and on.
You can reset the change oil light on your 2010 Nissan Ultima by going to the oil life display. When the oil life display is illuminated hold in the checkmark button until the oil life goes to 100 percent.
reset service light on 2010 ml 550
coaster bus how do you reset timing belt light 2010
To reset change oil light on Honda sh150i. Have key in off position, hold down the clock change button, while turning the key to on position, continue to hold for 2 sec while change oil light goes off.
Reset the device by debugging it.
the system is very sensitive to cold temperatures. it will trigger in very cold weather so all you have to do is raise the air pressure to the proper psi and the system will then register a new and proper reading and turn off the light. there is no reset.
Turn on Ignition - depress gas pedal 3 times- turn off ignition
The abs light is reset with a scan tool after repairing the failure that caused the code.
The airbag light stays on when the computer has detected a malfunction and set a code. The light can not be reset until the failure is repaired.
Key on engine off, press gas pedal to the floor three times, cycle key off and back on.