To reset, follow the instructions in the manual, but instead of the accessory position, turn the ignition to the ON position. Be very careful to not go past to the start position.
Type your answer here... GO TO MENU, conveinece, oil life reset, hit ok when it reads set to 100 and hold ok!
press the setup button until it switches to life, then press reset, if the oil life is already up press reset first then press setup until it switches to oil life, then reset again
they need to get a life
Turn key II position Press & hold Odomenter reset button until service light flashing. Press the reset button again for > 5 seconds The service oil life display will be reset to 100%
Either check your alternator or your battery life and replace as see fit.
"La vida es una fiesta". You could replace "fiesta" with "celebración".
Using the odometer post (little thingee sticking out of the speedometer) push the post until the oil life is displayed. Then push and hold the post for about 10 seconds. This should reset the oil life to 100%
Yes it does have a timing belt; it has a long life interval of 150,000 miles or 10 years which ever comes first.
You scroll thru menu until you see oil life and hold button in for 3 seconds and it will change it to 100 percent.
IF you have the black buttons on the steering wheel, on the RIGHT side, I believe the RESET button gives you the option to do the System Check. When the Oil life appears on the screen hit the RESET button again. A screen will then show up asking if you want to reset the oil life to NEW, if so select RESET again. The timing is very hard. It took me 3 tries my 1st time.
Key on, engine off. Press the gas pedal to the floor three times.
Press and release SETUP to display "OIL LIFE XXX% HOLD RESET = NEW".Press and hold RESET for two seconds and release. Oil life is set to 100% and "OIL LIFE SET TO 100%" is displayed.From pages 22-23 of your owner's manual.It seems not all Fusions can be reset by the instructions in the owner's manual. I have a 2010 Fusion SEL and I have to quickly hit "set-up" twice for the OIL LIFE to appear and only by hitting it twice will it remain on OIL LIFE so you can then hit "reset" to get it back to 100%