ratio is 3.73
ring gear 41 pinion 11 41/11 = 3.7272727272
41 and 11
When one gear is used to drive another, the number of teeth on each gear will factor into the ratio. Even if the number is the same it will have a 1 to 1 ratio. In a rear axle, for example, a common ratio is 41 teeth on the ring gear (driven gear) and 11 teeth on the pinion gear (drive gear). 41/11 is 3.727272 or commonly called a 3.73 to 1 ratio. It take 3.73 turns of the drive gear to get one turn of the driven gear. If you are interested, the different ratios provide different combinations of speed and power. Thus a large gear pulling a smaller one gives speed while a smaller gear pulling a larger one gives power.
You divide the number of teeth on the small gear into the number from the larger gear. -The answer is your ratio.
41/11= 3.7272727272 3.73:1
Divide driven teeth be drive teeth, ie: 41/11=3.727272727 (3.73:1)
Pinion - 2010 is rated/received certificates of: Sweden:11
they have 11 teeth they have 11 teeth they have 11 teeth
No as of 11/11/11 her teeth have not been fixed. Not that anything is wrong with her teeth.
Replacing the rack and pinion gear is a big job. You will need a shop manual for this. Check this article: http://free-auto-repair-advice.blogspot.com/2007/11/finding-repair-information-you-need-at.html
Lance Gear is 5' 11".
Gear Blues was created in 1998-11.