Its actually pretty easy to do. Just about with all vehicles. You need to find your tension pulley. It is the pulley with a spring on it. Attach a socket to that pulley and pull it until the tension on the belt lossens up. The belt will drop off. To put the new belt on just follow the diagram that is usally on the cowl above the radiator that shows how the belt goes around all the pulleys. Use the belt tension pulley to get it on and the tensioner will automatically tighten to the belt. Make sure you get the right size belt for your truck. I'm not sure exactly where the tension pulley is on that car but it should show you on the diagram. It's very easy and you will be shocked how easy it is. Good luck.
Should automatically supply the proper tension for the serpentine belt - if not could be defective and require replacement
If it
How to remove and install the serpentine belt on 1991 Chevy Blazer with AC?
Where can i find a serpentine belt diagram for a 1993 s-10 chevrolet blaze?
how do you change the serpentine belt on a 2001 Rodeo
100,000
Put the serpentine belt around the pulleys on your 2001 Chrysler LHS. Tighten the serpentine belt by pushing the tensioner pulley to the left. Tighten down the tensioner pulley and the serpentine belt will be tight.
Loosen the tensioner pulley. Slide the tensioner pulley to the right. The serpentine belt will come loose. Remove the serpentine belt. Reverse the process to install the new serpentine belt.
it is the belt by the alternator belt
You can't. it has an automatic self adjusting belt tensioner on it.
The ac belt has a tensioner that is accessed from below, and takes a tensioner tool to loosen. Remove the serpentine belt, release tension on the ac belt then the belt can come off for replacement.
Pull the belt tensioner to the side with a socket and ratchet. Slide the old belt off. If possible use a helper to slide the new belt on. Release the ratchet to let the pulley hole the belt in place.