Well yes and no. I'm only 28 so some people think why listen to someone wet behind the ears hes wrong so here it goes. A lot of old timers will say yes so there pumped up and it does seem to be effective but alot of companies say no dont do it Let them pump up. I think the reason most people soak them is possibly cause they dont know how to set up the valve lash without resistence from the pumped up lifter or maybe there afraid the pressur of the valve spring will prevent it from pumping up but this is just not so. They are desighned to pump up automaticly . There hydraulic they work off pressure and as long as your engine has it it wont be a problem if not even being soaked without adequete pressure they will bleed down and tick so... just make sure that you lube the foot well so thge lifter and cam take. Its just as if not more critical if your using a used cam cause the old ones have already worked a specific wear pattern . Hope this helps if your not familiar with setting the lifters let me know thers an easy way for that to be done if you dont have a book
Stephen Hilt S. Fulton TN.
That works ok, or you can use a pushrod to pump them up while submerged in oil.
It takes about 6 hours and be sure to soak the new lifters in oil over night.
Yes, don't soak them.
soak it in soapy water overnight.
it turns in to a patato
No because green beans are to big to dissolve. Sugar and salt can because they are small enough.
Soak them overnight in water and baking soda.
the slice mango will be rough
Clothes. Beans, Laundry, Meat, Dishes
Pearl barley does not need to be soaked but it will be fluffier if you can soak it for at least 4 hours or ideally overnight.
Take a sample of the paper and soak overnight in water, and soak another piece in alcohol. If ink had been present, either solution should be discoloured. If in doubt, use plain paper: white or brown wrapping paper.
soak 2 dry figs overnight in milk n consume it before breakfast and you can see the result in two months