0
Should the wheels be large in the front and back for a pinewood derby car?
Wiki User
∙ 12y ago
You need to use the wheels from the kit. They are all the same size.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Should your wheels be turned to or away from the curb when parked?
Your front wheels should be turned so that, if your car were to roll it would turn into the curb. If your car is facing downhill, the front wheels should be turned into the curb. If your car is facing uphill, your front wheels should be turned away from the curb.
Where are the hydraulic hjacking points on a 2005 caravan?
Should be at the frame rail Behind the front wheels in front of the rear wheels
In what direction should your front wheels be pointed when facing down hill with curb on right?
Front wheels should be pointed to the right, directed at the right side curb.
When parking uphill on street with no curb how should your front wheels be positioned?
When parking uphill on a street with no curb, the front wheels should be positioned to the right. If there is a curb, the back of the right front wheel should be turned against the curb.
Which direction should you point your front wheels when parking uphill with a curb?
Turn your wheels to the left.
Best location for weights in pinewood derby cars?
The balance of the car should be about 1/4 to 1/2 in' in front of the rear axle. This depends on the length and roughness of the track you are running on. Long tracks such as 50 feet or more should have the balance at around 1.5 inches in front of the rear axles. Shorter regulation tracks of 32 feet usually can get more aggressive down to 1/2". I find that anything below 1/2 inch runs the risk of the car's front wheels lifting off of the track (aka popping a wheelie). If this happens, your car will loose a large amount of potential energy and immediately begin to slow down. If your track is old and looks rough I recommend moving the balance point about another 0.25 inches forward of where you were going to place it. This helps make the car more stable so the front wheels will not lift off the track when the car hits a slight bump.
Should both front wheels turn on a Honda accord?
Of course they should.
Who started Pinewood Derby?
Cubmaster Don Murphy organized the first pinewood derby, held on May 15, 1953 in Manhattan Beach, California by Pack 280c.[2] Murphy's son was too young to participate in the popular Soap Box Derby races, so he came up with the idea of racing miniature wood cars. The cars had the same gravity-powered concept as the full-size Soap Box Derby cars, but were much smaller and easier to build. After Don Murphy's first race in 1953 the Los Angeles County Department of Recreation copied the pinewood derby with Murphy's permission.[3] Don Murphy died July 1 2008, at age 90 of pneumonia.[4] In the 1980s, the design of the block was changed from a cutout block, consistent with a 1940's style front-engined Indy 500 car, to a solid block. The tires were also changed from narrow, hard plastic, to wider "slicks". * http://en.wikipedia.org/wiki/Pinewood_derby
Where do you place jack on front of 2001 alero?
Should be on frame behind front wheels (side of vehicle)
Where are the Chevy van tire jack points?
Side of van along the frame Behind front wheels and in front of rear wheels Side of van along the frame Behind front wheels and in front of rear wheels Side of van along the frame Behind front wheels and in front of rear wheels
Which tires do you put chains on for a Honda CR-V 2002?
The primary drive wheels are the front wheels - therefore, those are the wheels that should have the chains placed on them.
Function of front wheels on forklift?
The front wheels are the drive wheels on most lift trucks.
