There may be small gaps at the corners. Once water is put in the pool, the pressure will stretch the liner to fill these gaps. Since the water fill from the bottom upwards, any air "trapped" on the bottom will be forced out the top as well when the pool is filled. The water is in the pool, liner is rounded in the corners and their is approximately 1" space between the liner and bottom/side corner of the pool bottom.
Tennis shoes outlets can be found anywhere in the world, especially if you just take the easy way and search. Just look for it anywhere, and I guarantee that you'll find one.
I had an inground pool installed. We just turned on the lights at night and noticed footprints on the bottom. Can this be fixed? Call the pool company back. The bottom is normally sand mixed with cement. The liner will probably have to be removed and bottom smoothed. They should have checked that before installing the liner. Those printswi catch sediment and debris for the life of the liner.
YES.
Yes it can be done
No. Replace the liner.
No you can use the pool with old liner. Foxx is strong and the sides will hold without water. The only thing is that you need to keep adding water and eventually the sand on the bottom will wash away.
Filter it then swim in it.
They don't make them for in ground.
air pocket behind pool liner inground
Remove the old damaged liner and install a new one.
Bottom Liner Blues was created in 1993.
Bottom Liner Blues has 167 pages.
If you have water behind your vinyl in ground pool liner, you should first lower the water in the pool to normal levels if it is over-filled. Make sure that the vacuum pipe is clear, unclog it if it is not. Once it is unblocked let the water from behind the liner flow out.