No, Do not drill a hole in your muffler! The water evaporate when the car gets warmed up. If you drill a hole in your muffler, The next time it gets inspected it will fail.
Drill 3 holes in the very bottom of the light housing. They should be 1/8 inch which will allow the water to drain and keep them from creating condensation.jd.
No heavy water in the muffler.
If a plastic lens, drill a very small hole at the bottom to let water drain out. If a glass lens, you will have to replace.
i have to drain out 4800 cusec of water
just if your worried buy a new muffler. but i would say not to bad. it will dry up. It really depends how much water you are talking about. Was water placed into the muffler say during a car wash? Or could it be coolant from a blown head gasket? Most modern mufflers actually create water through a chemical reaction. So if you are seeing a little drip out of the drain hole you are probably ok.
If the hole is smaller than a nickel, I would not worry about it. If the hole is on the bottom side of the exhaust pipe, it might actually be a good thing, as it would allow the water in the exhaust to drain out before it enters the muffler. Some newer cars have drain holes in the exhuast system to prevent things from rusting out quickly.
If there is water in a headlamp, then you can carefully drill a hole in the plexiglass front close to the bottom to let the water drain out. Then the hole can either be sealed, or left open to let any future water drain out.
Take a 1/8 inch drill bit and drill 3 holes in the very bottom of the headlight. That will let it drain and also keep it from building condensation.
you should drain it using your mouth
They drill water wells, usually with a truck mounted 6 inch drill.
depends if drain is clogged or not
Drill sea water?