I also have a 2002 Mustang GT with a bad PCV valve. It made a ticking noise while the motor was running then ticked for 3-4 seconds after it was turned off. A way to test if it is a bad PCV valve is to remove it and see if the noise stops. It is in the right head just under the intake hose. Lift it out and if the noise stops there is your problem. It's a five dollar fix.
The PCV valve on 1992 ford mustang 5.0 is on the drivers side.
The PCV valve on a 2002 Pontiac Bonneville is located on the back of the in take manifold, however to get to the PCV valve you will need to remove the valve cover.
the pcv valve is located on top of the valve cover
The 2002 Chevrolet PCV valve is located on the outside of the air intake housing. The valve will be on the back of the housing.
The PCV valve on a 2002 Chevy Cavalier is located on the back of the valve cover. It is a plug in type.
I had the same question. Seems it does not have a PCV valve.
in what location can I find the pcv valve on my 2002 chevy tahoe
Top of passenger side valve cover
The PCV valve is located in the back of the lower intake manifold. It should have a 3/8" hose going from the PCV valve to a vacuum source on the upper intake manifold.
The PCV valve on a 2002 Lexus RX300 is located on the passenger side of the car underneath the hood. The valve will be on the rear valve cover.
The PCV valve is located on the top of the valve cover. There will be a large vacuum line connected to it.
On 2002 Ranger 3.0L, the PCV valve is mounted in the valve cover near the brake booster.