The bottom bolt is a 10mm x 1.5mm x 35mm metric flange bolt grade 8.8. This is on a 2002 Ford Excursion 7.3 4x4 Automatic. The top bolt could be the same, but I don't know as mine has fallen out. Hence the reason I came across this post.
What size is the starter bolt on 6.5 turbo diesel starter?
Gas engine has a bolt at the top and a nut on a stud on the bottom. The diesel starter is held by three bolts.Gas engine has a bolt at the top and a nut on a stud on the bottom. The diesel starter is held by three bolts.
Diesel - 8 X 160mm
no the transmission bolt patterns are different. huxrn
first disconect batteries now get under vehicle disconect wires from starter motor there are three mounting bolts that hold starter in place two are easy to get at the third is on top side of starter and you will need a socket extension bar and a socket universal extension to reacg this bolt after removing three blots starter will come off bell housing instalation is exact opposite
14 milimeter
will 1996 f250 rims fit a 1999 f250 bolt pattern
(1) You must first remove the bracket clamp that retains the wiring harness to the trnsmission. (2) Disconnect the starter wires from the starter and that should give you the clearance you need to get a wrench on the upper starter bolt. (3) then remove the lower bolt.
disconect the coil and remove the 7mm bolt that holds down the coil, remove the coil then plug.
I think the bolt is a 10mm then pull it out. Have not had many problems with the 6.0 cam sensor like the 7.3L
There is an Allen key bolt at the top of the clutch pedal.
8 X 6.5