Don't know about the Holden specifically, but in general, the starter will be held in place with two bolts.
First, you'll want to disconnect the negative battery cable, then look at how the wiring is attached to the starter (which wire goes to which terminal). Then disconnect the wiring (should only be 2-3 wires).
Then locate and remove the two bolts holding the starter in place.
Installation is the reverse of removal.
passenger side, under neath the steering rack and the exhaust headers
1997 vs Holden Commodore won't start,it just
Starting from about AUD$130 refurbished or new on eBay, or more from a dealer.
it is under the intake mannafold drivers side
un bolt it and take it out. using spanners
where is a starter motor located on a Audi a car n reg
You can find the starter on the right hand side of the motor. The starter will be near the back of the motor. You can follow the positive battery cable to the starter.
The Commodore requires a gycol based coolant, its uses a50% coolant, 50% water mix. Ensure the coolant you choose is a high quality and suitable for V6 motor
The starter is located under the front drivers side of the motor next to the Transmission. It can be found by the motor mount.
The starter motor is located at the back of the cylinder block on the right hand side
If your car has starting problems it could be that your starter motor is scewed! So maybe you should get a new starter motor or even better get a new car! (my favourite is my friends Holden Commodore 2006 model which is seriusly hot and he said that the car is mine when i get my liecence!! yay me!!)
To replace the motor you start by removing the exhaust or you can undo the mount and lift out the motor. Consult owners manual for additional information.
No, there is a starter solenoid located on the starter motor.
on the motor.