jacking oil is not required when stopping the steam turbine
gland steam temp should be nearer to less than turbine lub. oil flash point.
It provides oil circulation into turbine while Regular oil circulation fails. We can say it as stand by oil tank.
1. For lubrication the bearings 2. For controlling the turbine 3. For sealing
Any moving fluid can power a turbine. This includes air, water, steam, burning fuel etc. When the fluid strikes the blades of the turbime it transfers energy to the blade causing the blade to move.
A turbine is powered by such things as steam, burning gas or oil, water, or wind. The turbine is a type of engine, which might be thought of as a more efficient choice than a gas engine or reciprocating steam engine for doing the same job. The turbine could do many things ranging from powering a vehicle such as a helicopter, a ship, a locomotive, or a piece of equipment such as a centrifuge, a pump, or a generator. When a turbine powers a generator, the generator makes electricity.
The steam turbine blades to turn creates steam.The steam engine, steam piston Myllng after the turn brings.+++They are both steam-engines. The turbine is purely rotative; the reciprocating steam-engine uses cylinders and pistons.
Oil is burned and the heat is used to boil and superheat water to make steam under high temperature and pressure. The steam is sent through a turbine. The turbine is connected to a generator which makes electricity.
# Burn the oil, use the heat to boil water. # Use the steam from the boiling water to spin a steam turbine. # Use the steam turbine to turn an electric generator. This is the basic process a conventional power station uses to generate electricity.
Other to coal I suppose you mean. Burning of any fuel like oil, wood, etc. Nuclear reactors. I suspect solar energy would make steam. It would be possible to use natural steam from deep in the ground.
Examples of external combustion engines: 1) wood-burning or coal burning steam-powered locomotives 2) coal and oil-fired boilers on steamships 3) Stanley Steamer, an early steam-powered motorcar 4) nuclear reactors
They burn the oil to boil water and create high temperature, high pressure steam. This steam is directed through a steam turbine which rotates. This is connected to a generator, which transfers rotational movement into electrical energy. The electricity is then passed through wires to your house.