0
i was messing with my router settings because my xbox live wouldn't connect.
on my ipv6 menu there was like 6 choices.
---automatically obtain ip address
---use the following ipv6 address
-subnet prefix length
-default gateway
-obtain dns server automtaically
-use the following dns server addresses
-preferred dns server
-alternate dns server
before i messed with it, it had manual settings and it had ip's.
but i changed the choice to automatically obtain ipv6 address and the dns server.
so it got rid of those numbers that were originally there.
and i don't remember those numbers.
how do i get the original numbers back?
because im trying to hook up to xbox live and now it wont connect at all.
so i have a feeling its because i messed with the ipv6 settings.
so what do i do???????
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How do you have the tunnel interface and the IPv6 Loopback interface as the only connections running IPv6?
by unchecking the check box of IPv6 in local area network properties
What must you use to span the gap in IPv6 support and access the IPv6 Internet?
IPv6 is not a separate Internet. It is a separate type of address. Machines can have both IPv4 and IPv6 addresses simultaneously. Many web servers already do this, and nearly all of the Internet's backbone routers have both types of address. Theoretically, if you are using IPv4 or IPv6, your data will take the same path, across the same hardware, to its destination. However, you may not be able to get an IPv6 address from your Internet Service Provider, perhaps since they are not yet IPv6-ready (often the case with smaller ISPs). In this case, you can setup a 6-to-4 tunnel which connects your IPv6 network inside your home to the IPv4 network of your ISP. Presumably, that ISP will also have a 4-to-6 tunnel allowing your packets to make their way to the IPv6 destination. That being said, if you know the IPv4 address of the same server, you can just use that without the need for IPv6. Only in the rare cases where servers only have an IPv6 address do you need to ensure that your packets come from an IPv6 address, then travel to the destination somehow (directly across an IPv6 network, or using tunnels as described above).
Why broadcast method is not implement in Ipv6?
In IPv6, the same result can be achieved by sending a packet to the link-local all nodes multicast group at address ff02::1, which is analogous to IPv4 multicast to address 224.0.0.1.
Which encryption techniques is incorporated into ip version 6?
There are two versions of internet protocol. The two versions of internet protocol are version 4 and 6. The Encryption techniques incorporated in IPV6 is IPsecurity .
What is the maximum number of IP addresses available?
In IPv4, which uses 4x bytes or 32 bits, there is a theoretical maximum of 4,294,967,296 IP addresses. In IPv6, which attempts to resolve the address shortage, uses 128bits, giving a maximum of ~ 340,282,366,920,938,463,463,374,607,431,770,000,000 addresses.
Does Windows XP support IPv6?
Short answer - yes.You need to be running Service Pack 1 at a minimum.Service Pack 2 has an even more complete IPv6 stack.To enable IPv6 on XP, open a command prompt window and type:C:\> ipv6 /?Did you then see this result?:C:\> ipv6 /?Could not access IPv6 protocol stack - the stack is not installed.To install, please use 'ipv6 install'.If you did get the above result, simply type:C:\> ipv6 installIt will take a few seconds, and then your Windows XP system will be fully IPv6 enabled.
What are the uses of ipv6 for commercial?
what is the commercial use of ipv6?
What is the length in bits of a logical IP address IPv4 and IPv6?
32 bits (for IPv4), or 128 bits (for IPv6).32 bits (for IPv4), or 128 bits (for IPv6).32 bits (for IPv4), or 128 bits (for IPv6).32 bits (for IPv4), or 128 bits (for IPv6).
Why is ipv6 not available?
IPV6 is relatively new and doesn't work everywhere yet.
How many bits are used for an IP address in IPv6?
IN IPv6 we can find 128bits.
How many bits are in an IPv6?
IPv6 uses a 128-bit address space
How do you have the tunnel interface and the IPv6 Loopback interface as the only connections running IPv6?
by unchecking the check box of IPv6 in local area network properties
What can you use to identify a ipv6 address?
IPv6 address has 2^128 address and IPv6 address is of 16 bytes and is represented in colon hex notation.
What is the effect of configuring the IPv6 unicast-routing command on a router?
By configuring an IPv6 Unicast routing command on a router you are allowing the router to communicate with the IPv6 interface. This is needed if you intend to send or receive data over an IPv6 network.
How much ip addr in the ipv6?
there are exactly340,282,366,920,938,463,463,374,607,431,768,211,456 ip address in the next generation internet protocol knows as IPv6 for more info visit: IPv6.com
Why is NAT not needed in IPv6?
Any host or user can get a public IPv6 network address because the number of available IPv6 addresses is extremely large.​ smb
What version of RIP do Cisco routers support?
Both 1 and 2. Also, RIPng (for IPv6).Both 1 and 2. Also, RIPng (for IPv6).Both 1 and 2. Also, RIPng (for IPv6).Both 1 and 2. Also, RIPng (for IPv6).
