0
Automotive : negative ( ground ) side
Household : common ( hot ) side
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How is an internal optical drive connected to the power supply?
the optical drive will connect to the power supply with a connector called molex connecter it is a 4 prong connector
What is the output of a PC power supplies when it is not connected to any road?
P 12 Connector
What is the purpose for the SATA-style power connector?
SATA power connector is a type of power cable with which we can provide Disks power from the mother board. SATA Power cables are connected from sata point on motherboard to the drive.
The black wire in a power connection is always connected to what?
It depends on what country and when the installation was made. This is because rules and regulations differ between countries and change over time. The black wire is in other words not always connected to the same thing. Contact a local electrician.
What color is At power supply on the connector?
White or Black depending on the brand
What power connect is used for a CD- rom?
Typically, CD-ROMs are connected using a power connector called a Molex Connector. A Molex Connector has four wires, two for power, the other two for grounding. This connector supplies two different voltages to the device it is connected to - 12v and 5v. For more information on Molex Connectors, see the article here: http://en.wikipedia.org/wiki/Molex_connector#Disk_drive_connector_.28AMP_Commercial_MATE-N-LOK.29
What are the voltages for a MOLEX Power Connector?
yellow in 12v red is 5v black in ground
How many pins does the regular ATX power connector to the motherboard have how many pins does the enhanced ATX power connector to the motherboard have?
the regular ATX has a 20 pin power connector, while the enhanced ATX power connector has 24 pin power connector.
What is a P1 power connector?
The P1 power connector is the first ATX power supplies and motherboards used a single power connector. It also has 20 pins.
What is JVC KS-A102 wire color code?
This car amplifier has a 9-pin connector. Power wiring: +12V = RED (fat cable) GND(Ground) = BLACK (fat cable) REMOTE = ORANGE (thin cable) Audio wiring, BLACK is connected to minus in this case. BLACK/BLUE = (both are thin) BLACK/WHITE = (both are thin)
No power to OBD connector for 2004 gmc Denali?
Check the fuse for the cigar lighter. It supplies power to the OBD connector. It's under the Hood in the electrical centre .. a black fuse box above the driver side wheel
You have installed a car stereo but have no power?
the black wire or yellow wire are not connected right
