0
The car shifts and drives fine but why would a car's standard transmission make a slight grinding noise only when the car is in neutral?
Wiki User
∙ 12y ago
sounds like the through out baring is all used up gust replace it and you might wont to get a new clutch and have the presser plate checked for dammage while you have the trans out..good luck
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
The car sometimes drives like it is in neutral?
Check the transmission fluid level. If it's up, check if it's burned. Burned transmission fluid will look darker and smell burned as well. If it's burned, the clutches are worn out.
How a 1998 trans am wont reverse but drives in neutral?
Hoe a train moves.
What technology standard is used to govern how drives such as CD-ROM drives Zip drives and hard drives can interface with a system?
Enhanced Integrated Drive Electronics (EIDE)
If a transmission stops working does the power steering stop working?
The transmission and power steering are usually two different systems. The transmission drives off the back of the engine and the powersteering pump normally drives off a belt on the front of the engine.
What is a common standard interface for hard drives?
backbone
Why does your ford windstar only drive in neutral?
If a Ford Windstar only drives in neutral, it may be due to a blown fuse. It will be best to check the neutral safety switch or brake pedal switch.
What standard provides the best performance for hard drives?
sata
What are the standard gigabytes for flash drives?
After researching the internet, I have found that the standard size for flash drives is currently 16gb. However, technology is always advancing, and the size will possibly go up.
How a 1996 Avalon wont reverse but drives in neutral?
Shift linkage may need to be adjusted?
Can you put a 95 suburban transmission in a 96 Tahoe?
If both trucks are 2-wheel drives are both of them are 4-wheel drives you sure can.
Can you put a 95 suburban transmission in a 95 suburban?
If both trucks are 2-wheel drives are both of them are 4-wheel drives you sure can.
What is transmission fluid used for?
Transmission fluid, like in automatic transmissions of cars, is used to transfer the power of the engine to the drive shaft. It's a hydraulic fluid, and the transmission is a hydraulic pump and a hydraulic drive all in one. The motor drives the pump (the torque converter), and it compresses the transmission fluid which in turn drives the clutch assembly.
