Want this question answered?
The crankshaft pulley is the large pulley on the lower passenger side of the engine.
the belt is simple to change you actually have two one is the powersteering belt and the other is ac belt. you need to first lower the top pulley closest to the front of the engine remove the belt of the three pulleys then lower the alternator using the tension screw and remove the pulley to install just follow in reverse
The crankshaft position sensor is located at the lower left hand side of the crankshaft pulley. The crankshaft pulley is the large pulley located in the center lower portion of the front of the engine.
The first pulley nearest the lefthand (window view) side and lower portion
The "check engine light" on a Mazda three is located to the left lower side of the tachometer. It is orange in colour.
Probably difficult to see but it has one, it's behind the lower portion of the water pump pulley. If you have coolant dripping out from behind the water pump pulley, it is coming out the weep hole, the seal is shot and probably the bearing also. Time for water pump replacement, don't wait.
A Mazda B3000 truck does not have a non interference engine. These engines are designed to survive catastrophic timing failures due to lower tolerances.
where the lower rad hose meets the engine block how do you change a thermostat on a b2500 mazda pick up
thermostat is located where the lower hose conects to the engine
A check engine code 332 for a 1994 Mazda 626 means that the EGR valve's voltage is lower than it is expected to be. The ERG valve is part of your Mazda's emission control system.
follow lower radiator hose back to engine.
Under hood, passenger side, lower engine area, above crankshaft pulley, mounted in engine block