when to chang timing belt on peugeot 407 hdi 1.6
A timing light and a 9/16" swivel socket to loosen the distributor.
Means it has 8 valves. Some have 16.
como encontrar las marcas de un sephia 1999
When to change out a timing belt on 06 vectra sri Mileage wise
Neither its a gear set. Well depending if you have the 2.2 Ecotec or the 2.4 QUAD DOCH. Those engines have timing chains. The 2.0 has 2 gears. one on the crank and one on the cam. The others both have timing chains because they are DOCH 16 Valvers
base timing should be set through the distributor with a timing light. hook up one terminal of timing light to #1 cylinder's spark plug wire and other terminal to negative battery terminal. point light at crank pulley and adjust timing by un bolting the distributor and turning it slowly until the mark from the timing light on the block correlates to 16 degrees BTDC. any other electronic ignition timing on a custom tuned vehicle should be altered via tuning software and laptop by a competent high performance tuner.
Its has a timing belt (2.0l 16 valve dual cam ) and a timing chain in rear of camshaft.
Step #1. Bridge #4 and #16 pins on the OBD input to negate automatic/respective advance using a 20 guage length of wire. Shoot with a variable timing light to 8-11 degrees depending on altitude.
Where are the timing marks on a 1992 Toyota Paseo 16 efi 1.5 liter engine?
there is 3 marks on the timing chain. 2 are exactly 16 links apart and the other is 22 from either of the 2. the engine should be at top dead center. line the 2 (16 apart) marks with marks on your cam gears and the 3rd with your crank gear. torque cam bearings to 100 inch lbs.
you have a timing belt its be-hin the cover