yes, see toms z31.com
replace coil springs in a nissan 300zx
i have a 300zx Nissan and i need to replace themultifunction switch i don't know how?
To replace the heater core in a 1984-1989 Nissan 300ZX, first disconnect the battery and drain the coolant. Remove the dashboard and the center console to access the heater core. Detach the heater hoses from the core, unbolt it from the housing, and then install the new heater core by reversing the disassembly steps. Reconnect all components, refill the coolant, and check for leaks.
under passenger side
The intake and exhaust manifolds, along with the timing belt will have to be removed to gain access to the head. Remove the head and replace the gasket. Torque the bolts down to the manufacturer specs and in the order Nissan suggests.
To remove and replace the heater core on the 1987 Nissan 300ZX with air, begin by removing the dashboard totally. This means the radio panel and the instrument cluster. Remove all air ducts and access the heater core. Remove the bolts holding the core and replace it with a new core. Then replace the dashboard and instrument panel.
your coil is bad replace with new on
ok....replace it
You'll have to take off the water pump because that is where the thermostat is.
under the passenger side dash beside the heater fan
There were 3,000 Nissan 300zx convertibles made
VG30DETT is in the 90-95 Nissan 300zx. It is a v6