Head bolts are 44 psi tightened 3 times in the proper pattern
torque specifications
15 to 22 ft-lbs
The connecting rod torque specifications, on a C 12 Caterpillar diesel engine, is 70 pounds per square inch. The main bearing torque specifications is 150 pounds per square inch.
what is the torque specifications for the intake bolts on a ford 4.2L?
65ft. LBS
In general starters do not have torque specifications. You will want to tighten the starter as tight as you can without breaking the starter bolts.
Get a manual on your car and it will give you the settings of the intake, exhaust bolts plus the head bolts and torque pattern.
on my '03' 125SX the head bolts should be 18nm.
I found it. It is 65 to 95 Foot Pounds of Torque for the bottom bolts.
The torque settings for the caliper pins on a Ford Escort is 21 ft-lbs. For the caliper anchor bolts, the setting is 98 ft-lbs.
What are the torque specifications and the tightening sequence of the cylinder head bolts on a 1996 Saturn SL1?
40 lbs on the water pump bolts