For your 1992 Nissan/Datsun 300ZX: Flywheel Torque 61-69 Foot pounds (Final torque)
You have to turn them twice. The first turn is 61 psi. The second turn is 72 psi.
Flywheel Torque 61-69 Foot pounds
61 psi
* Step 1: All to 61 N·m (45 ft. lbs.) * Step 2: All to 88 N·m (65 ft. lbs.) * Step 3: All (again) to 88 N·m (65 ft. lbs.) * Step 4: + 90° Turn Do not use a torque wrench for this step.
The rear track of the 2014 Dodge SRT-Viper is 5 ft. 1 in. (61 in.).
The rear track of the 2013 Dodge SRT-Viper is 5 ft. 1 in. (61 in.).
61 liters or 16.1 gallons
4.7 x 61 =286.7 cu in...........
61 liters, or about 16.1 gallons. Here's the reference: http://www.automallusa.net/1998/dodge/stratus/specifications.html
Dartmouth Dodge is the leading Chrysler, Jeep, Dodge and used Car dealer in Dartmouth, Halifax and area. It is located at 61 Athorpe Drive in DARTMOUTH, NS B2W 1K9.
4 cylinder: Bolt 7 is on the front driver's corner. # Tighten all bolts in sequence (1 through 10) to 30 N·m (22 ft. lbs.) torque. # Tighten all bolts in sequence (1 through 10) to 61 N·m (45 ft. lbs.) torque. # Check all bolts to verify they are set to 61 N·m (45 ft. lbs.) torque. # Tighten bolts (in sequence): # Bolts 1 through 6 to 149 N·m (110 ft. lbs.) torque. * Bolt 7 to 136 N·m (100 ft. lbs.) torque. * Bolts 8 through 10 to 149 N·m (110 ft. lbs.) torque. # Check all bolts in sequence to verify the correct torque. All "V" engines: Starting at top center, tighten all cylinder head bolts, in sequence, to 68 N·m (50 ft. lbs.) torque , Repeat procedure, tighten all cylinder head bolts to 143 N·m (105 ft. lbs.) torque. Repeat procedure to confirm that all bolts are at 143 N·m (105 ft. lbs.) torque.