0
1. Turn on the vehicle, but don't start the engine(press the starter button twice with your feet off the brake pedal).
2. Press the ODO button until the screen gives the odometer total (not the trip A or B).
3. Turn off the vehicle.
4. Press and hold the Reset button, while turnning on the vehicle, don't start the engine.
5. After about 7-10 seconds a message to come up showing that it has been reset.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Maintenance required light Toyota 2007 highlander?
Turn ignition to 'ACC' and press the odometer button until the display reads actual mileage... not Trip A or B. Turn ignition off. Hold in the same button you used in step 1. While holding the button in, turn ignition to 'ON'. The 'Maint Reqd' light should blink and go out. Done! If you wish to confirm, this info should be in your owner's manual.
How do you reset maintenance required light for Lexus SUV 330?
How do I reset the "Maint Reqd" light located on the instrument panel? This procedure should be used to reset the light when maintenance has been performed: 1) Turn ignition switch to the ON position. 2) Set the Odometer/Trip Display to the ODO mode 3) Turn the ignition switch to the OFF position. 4) Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position. 5) The Service Maintenance Reminder Light will: a. Illuminate solidly for 3 seconds. b. Blink for 2 seconds. c. Illuminate solidly for 1 second. d. Turn off. 6) Release the Trip Meter RESET button. 7) Turn the ignition to the OFF position. 8) Turn the ignition to the ON position, and confirm that the Service Maintenance Reminder Light goes out. NOTE: If the light continues blinking in step 5a, turn the ignition off, and repeat the procedure from step 1.
How do you reset maint reqd light on 1992 Plymouth voyager?
The maintenance required light requires a scan tool to be reset.
How do you reset Maintenance required light on a 2001 Honda Accord ex?
How do you reset the maintenance light on a 2001 Honda accord ex I found some options at http://www.tegger.com/hondafaq/maintenance-reqd-light.html#why
How do you reset maintenance indicator for LEXUS GX 470?
1. With your car OFF, place your key in the ignition and turn to "On". Do not start the car. 2. Find the odometer button and press until it reads the total odometer setting, (not the Trip A or Trip B setting). 3. Turn the key to OFF. 4. Place your finger back on the odometer button, press and hold. Then while still holding the button, turn the key back to "On" (not START). 5. Hold the odometer button in until the MAINT REQD light goes out...should take about 8-10 seconds.
How do you clear maintenance required light on 2004 Lexus ES330?
1. With your car OFF, place your key in the ignition and turn to "On". Do not start the car. 2. Find the odometer button and press until it reads the total odometer setting, (not the Trip A or Trip B setting). 3. Turn the key to OFF. 4. Place your finger back on the odometer button, press and hold. At the same time, turn the key back to "On". 5. Hold the odometer button in until the MAINT REQD light goes out...should take about 8-10 seconds.
How do you reset the maintenance required light on your 2005 Lexus ES330?
try this if it is the reminder light to change your oil and stuff. 1. With your car OFF, place your key in the ignition and turn to "On". Do not start the car. 2. Find the odometer button and press until it reads the total odometer setting, (not the Trip A or Trip B setting). 3. Turn the key to OFF. 4. Place your finger back on the odometer button, press and hold. At the same time, turn the key back to "On". 5. Hold the odometer button in until the MAINT REQD light goes out...should take about 8-10 seconds.
What does the maintenance required light on a 1999 Honda Accord mean?
The maintenance light automatically starts flashing when you reach a certain mileage. It does not mean that you need to do maintenance (although scheduled maintenance is recommended), it is just a reminder. Additionally, it is a reminder to change your oil. If you reset it each time you change you oil, then supposedly based on how you drive it the car will tell you to when to change the oil. To reset your maintenance light, follow this procedure Odometer reset button procedure # Turn the key to the II position (but not to III, or START) # Turn the key to the 0 (OFF) position, then push -- and hold -- the trip odometer reset button # Turn the key back to the II position, while still holding the button # After about 10-15 seconds, the light should go off # Release button and turn key to 0. (source: http:/www.tegger.com/hondafaq/maintenance-reqd-light.html )
What does maint reqd' mean on a honda accord?
More than likely means you need an oil change. Look in your owner's manual and it will tell you what maintenance is required based on your mileage.
How do you turn off the maintenance required light on a 2009 Camry?
1. Put the key in the ignition and turn it up one notch. The dashboard lights will not turn on. 2. Hold down your trip meter button next to the odometer. 3. When you are holding the trip meter button down, turn your key to the next notch. So, the dashboard lights will be on, but the car will not be started. Do not start the car. 4. Continue holding the trip meter button until the light turns off. You have now reset your maintenance required or maint reqd, light.
How do you turn off Lexus RX350 Maintenance Light?
If you are doing the oil change for RX350 by yourself, then here is the instruction on how to reset the maintainance light: 1. With your car OFF, place your key in the ignition and turn to "On". Do not start the car. 2. Find the Odometer button then press and hold until it reads the total odometer setting, (not the Trip A or Trip B setting). 3. Turn the key to OFF. 4. Place your finger back on the odometer button, press and hold. Then while still holding the button, turn the key back to "ON" (not START). 5. Hold the odometer button in until the MAINT REQD light goes out... should take about 8-10 seconds.
How do you reset the maintenance required light on a Toyota Highlander?
Maintenance Required LightTurn ignition to 'ACC' and press the odometer button until the display reads actual mileage... not Trip A or B. Turn ignition off.Hold in the same button you used in step 1.While holding the button in, turn ignition to 'ON'.The 'Maint Reqd' light should blink and go out.Done!If you wish to confirm, this info should be in your owner's manual.__________________________________-- for the 2004 HighlanderSame as above except turning to ON did not work for me but turning to ACC did.For me..... and I have a 2005 Highlander, I had to hold the odometer button down for several seconds, In my case I had to hold it down for 6 seconds.For my 2007 Highlander you turn the ignition to ACC press the odometer button, turn it to off, then turn it back to ACC (not "ON") while still keeping the button depressed. The dealership had it wrong, as well.
