Turn ignition off.
Hold in the same button you used in step 1.
While holding the button in, turn ignition to 'ON'.
The 'Maint Reqd' light should blink and go out.
If you wish to confirm, this info should be in your owner's manual.
-- for the 2004 Highlander
Same as above except turning to ON did not work for me but turning to ACC did.
For me..... and I have a 2005 Highlander, I had to hold the odometer button down for several seconds, In my case I had to hold it down for 6 seconds.
For my 2007 Highlander you turn the ignition to ACC press the odometer button, turn it to off, then turn it back to ACC (not "ON") while still keeping the button depressed. The dealership had it wrong, as well.
Read the owners manual. It has step-by-step instructions.
maintenance with engine
On a 2012 toyota Highlander, How do you replace tail light Assembly
Yes, there is an ABS light indicator in the 2004 Toyota Highlander model.
What year ?
disconnect the battery
Depends on which light you are referring to. The "Check Engine" light comes on when there is a problem with the emissions system. The "Maintenance Required Light" comes on when scheduled maintenance is required as outlined in your owners manual.
The computer is advising you that your oil change interval is drawing near. When the light changes to a steady glow you will have passed the factory set mileage recommended for an oil change.
How do you reset the maintenance required light in the 2011Toyota RAV4 with a smart key starting system
The time for your next oil change is coming very near.
It probably means that 7,500 miles have passed since your last oil change. If that is not the case, take it to a shop that can plug into your OBD system and read the trouble codes.
It needs maintenance you can disconnect the negative (-) terminal of the battery and reconnect it to clear any erros in the ECU
It means it's time to change your oil.
Your drivers manual should give you the information to reset the oil maintenance light.
It means you've passed the 7,500 mile mark since your last oil change. Within a few more miles (maybe evn by the time you get this) the light will have gone to steady on.
How to Reset Maintenance Warning Light on a 2008 Toyota 4Runner
Check engine light or required maintenance light. Procedure for resetting required maintenance light just answered. Check engine light requires an OBD II to determine problem and turn the light off.
The lamp in the top brake light of a Toyota Highlander can be replaced by the locating the light housing from the trunk. Find the light cover and remove it to access the lights. Replace the bulbs.
needs oil change... needs oil change...
You will need to take it into a mechanic. They will be able to check out your vehicle and then they can turn off the light.
Press and hold the trip set knob (inside the speedometer) until it reads 0000, and while holding it try to turn the ignition key to acc. DO NOT START the engine. The messege will clear
it means when the maintenance light is on
HAs it had an oil change recently ? Also check oil level.
This is basically an "oil change reminder" light. Check your manual on how to reset it.