The 2003 Toyota Sienna wiper blade sizes are 24" drivers side, 18" passenger side and a 17" rear wiper. See sources and related links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only. Be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
The 2005 Toyota Sienna had a production change mid-year that affected the wiper configuration.Step 1 is to measure the length of the blade on your vehicle. "Early" Production 2005 Toyota Sienna: 14" Special Rear Wiper Blade"Late" Production 2005 Toyota Sienna: 16" Standard Rear Wiper BladeStep 2 is to be sure you get the right replacement wiper blades.Step 3: The replacement wiper blades will come with simple-to-follow, step-by-step, illustrated instructions
The 2004 Toyota Sienna has the most common hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
Drivers side 26'' Passenger side 19''
Once you get the correct rear wiper blade, its literally a snap! The wiper blade is tough to find, however see below. Also see below for an installation video.
My 2003 Sienna has one tank that is for the front and rear window. You might have a problem with your pump or something else. Does your front wiper work?
Pop off plastic cover and tighten nut. See the Sources and Related Links section below for wiper blade info.
Step 1 is to be sure you get the right replacement wiper blades. The 2000 Toyota Sienna takes 24" driver side, 18" passenger side replacement windshield wiper blades on the front and a 17" replacement rear wiper blade. Step 2: As far as installation, the replacement wiper blades will come with simple-to-follow, step-by-step, illustrated instructions.
The 2004 Toyota Sienna has the most common hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
Two 19" blades for the front and one 14" blade for the rear. You must go to the toyota dealer for the rear wiper blade but the front wiper blades are available aftermarket. See sources and related links below for more information.
The 2009 Toyota Sienna takes a 26" drivers side, 19" passenger side and a 16" rear wiper. See sources and related links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only. Be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
The 2008 Toyota Sienna takes a 26" drivers side, 19" passenger side and a 16" rear wiper. See sources and related links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only. Be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
The Toyota Highlander rear wiper blade is held in place by two retaining clips. Remove the retaining clips and the wiper blade will slide out.