Belt routing is on a decal in the engine compartment. Some are also in the owner's manual.
Belt map is on the hood or the firewall. If not go find one. It is in the manual and inside the engine compartment.
In the engine compartment, somewhere in front of the top of the radiator, there should be a diagram sticker showing how to run the serpentine belt
Loosen the tensioning pulley and install new belt. There should be a routing diagram in engine compartment or on hood.
My 1995 Ford Explorer has a diagram in the front of the engine compartment showing how the serpentine belt is routed . Does your Ford Aerostar not have that .
Its in the engine compartment ( but sometimes not ), the owners manual, in the haynes or chiltons manual, or online at autozone.com
In the engine compartment.
On one of the stickers in the engine compartment , ahead of the radiator , there should be a serpentine belt routing diagram
there's a routing diagram right in the engine compartment on the right (passenger) end of the engine if yours is gone just take a camera to a dealership
That's the metal wall that divides the engine compartment from the passenger compartment ( that you see best from the engine compartment )
Only about 10 minutes providing you still have the routing diagram attached to the engine compartment and a tool for the tensioner on hand.
what engine is it and which belt?? timing or serpentine?
Unless it has been removed, sh0uld be a routing diagram on the radiator cover inside the engine compartment, left side as you are facing the vehicle. AJ
On a 1996 Ford Mustang : The automatic transmission fluid level dipstick is located in the engine compartment , near the firewall , on the passenger side of the engine in the engine compartment ( use a funnel )
That info should be under the hood in the engine compartment, if not get a repair manual or use the internet to see if you can find the diagram that you need.
A 2007 Dodge 3500 diesel engine serpentine belt routing diagram can be obtained from most auto-parts stores. When you purchase the serpentine belt, ask for a routing diagram.
It should just fit right in the engine compartment and hook up right
The serpentine belt you can look at the diagram in your engine compartment for actual routing. The tensioner mounts to the left side of the engine. You need to unbolt the whole assembly. Actually, the belt can be loosened by tightening the bolt of the tensioner pulley. When fully tightened, the pulley will act as a swivel.
I need a routing diagram for a serpentine built on a 1999 cavalier 2.2 engine with air codition
I have a 95 GC Laredo and the serpentine belt routing diagram is "printed" on the top of the belt tensioner mechanism which is on the LEFT side of he engine compartment as you are facing the front of the vehicle.
Is there not a serpentine belt diagram at the front of the engine compartment , in front of the radiator ( there is on my Ford EXPLORER )
there should be a sticker in the engine compartment the shows the routing
There should be a diagram under or on the Hood inside the engine bay to denote Belt routing. If not then acquire a Repair Manual specific to that Vehicle.
Yes a 429 would fit into a 1969-1970 ford mustang without no engine compartment mods
The diagram is not on a decal under the hood or in the engine compartment.