Voltage(E)=Amps(I) x Resistance(R) (ohms) use this formula to solve for other two.
S = 1/R Where S = Conductance in Siemens R = Resistance in Ohms If R is in Mega Ohms, S will be in Micro Siemens
In series like so ---6 ohms ---- 12 ohms --- , the total resistance is just 6 ohms + 12 ohms.assuming you mean in parallel like this:_|---6 ohms-----|-|~|-_|---12 ohms---|then the resistance of this can be calculated like so:1/6 ohms + 1/12 ohms = 1/R (where R is the resistance of the circuit as a whole)2/12 ohms + 1/12 ohms = 1/R3/12 ohms = 1/R1/4 ohms = 1/Rso R = 4 ohmsA few notes, if the resistors are in parallel the total resistance will always be less than or equal to the lowest resistance in parallel (i.e 6 ohms in parallel with 12 ohms will have resistance less than 6 ohms).Also if two resistances in parallel are the same, then the resistance is half of the resistance of both resistors (i.e. 1/2 ohms + 1/2 ohms = 1/R; 1 = 1/R, R=1 ohm which is half of 2 ohms).This process can be extended to 2 or more resistors in parallel.i.e if we had a 6 ohm, 6 ohm and 12 ohm resistor in parallel we could go1/6 ohms + 1/6 ohms + 1/12 ohms = 1/R(1/6 ohms + 1/6 ohms) + 1/12 ohms = 1/R1/3 ohms + 1/12 ohms = 1/R4/12ohms + 1/12 ohms = 1/R5/12 ohms = 1/Rso R = 12/5 ohms or 2.4 ohms
v=i*r
in transformer
ohms=amps/volts Amps= volts/ohms Volts = Amps*Ohms
Voltage(E)=Amps(I) x Resistance(R) (ohms) use this formula to solve for other two.
S = 1/R Where S = Conductance in Siemens R = Resistance in Ohms If R is in Mega Ohms, S will be in Micro Siemens
In series like so ---6 ohms ---- 12 ohms --- , the total resistance is just 6 ohms + 12 ohms.assuming you mean in parallel like this:_|---6 ohms-----|-|~|-_|---12 ohms---|then the resistance of this can be calculated like so:1/6 ohms + 1/12 ohms = 1/R (where R is the resistance of the circuit as a whole)2/12 ohms + 1/12 ohms = 1/R3/12 ohms = 1/R1/4 ohms = 1/Rso R = 4 ohmsA few notes, if the resistors are in parallel the total resistance will always be less than or equal to the lowest resistance in parallel (i.e 6 ohms in parallel with 12 ohms will have resistance less than 6 ohms).Also if two resistances in parallel are the same, then the resistance is half of the resistance of both resistors (i.e. 1/2 ohms + 1/2 ohms = 1/R; 1 = 1/R, R=1 ohm which is half of 2 ohms).This process can be extended to 2 or more resistors in parallel.i.e if we had a 6 ohm, 6 ohm and 12 ohm resistor in parallel we could go1/6 ohms + 1/6 ohms + 1/12 ohms = 1/R(1/6 ohms + 1/6 ohms) + 1/12 ohms = 1/R1/3 ohms + 1/12 ohms = 1/R4/12ohms + 1/12 ohms = 1/R5/12 ohms = 1/Rso R = 12/5 ohms or 2.4 ohms
Ohms law. R = E/I,where R= resistance in ohms, E = voltage in volts, and I = current in amperes.
v=i*r
V = I.R R = V/I R = 110/0.5 R = 220 Ohms
R = U / I = 240 / 20 = 12 Ohms.
in transformer
Can not do it without knowing the voltage I = E/R. Amps = Voltage/Ohms.
The mathematical form of Ohms law is I=V divided by R. I is current, V is voltage while R is the resistance.
5 Ohms Ohm's Law is V=I*R, 40V=8A*R, R=5 ohms.