0
What else can I help you with?
Can you use a 12v halogen bulb with a 6v AC adapter - wattage is the same?
No, you cannot use a 12v halogen bulb with a 6v AC adapter. The voltage of the bulb must match the voltage of the adapter for them to work properly. Using a higher voltage bulb with a lower voltage adapter can cause the bulb to burn out or potentially damage the adapter.
Can you use a 13v 2.77 amp ac adapter in place of a 12v 3.0 amp ac adapter?
It is not recommended to use a higher voltage adapter than what is specified for your device. Using a 13V adapter instead of a 12V adapter may damage your device due to overvoltage. It is best to use the adapter with the exact voltage and current specifications that are recommended by the manufacturer.
Can you use a 12V adapter in place of a 9V?
no, different voltage could fry solid state components.
Can you use a 12v-0.6a 7.2va adaptor instead of a 12v 1.5a adaptor?
No, you cannot use a 12V 0.6A (7.2W) adapter instead of a 12V 1.5A adapter. The 0.6A adapter provides insufficient current for devices that require 1.5A, potentially leading to underperformance or damage to the device due to inadequate power supply. Always match the voltage and ensure the current rating of the adapter meets or exceeds the device's requirements.
What if you use a 20V adaptor for a 12V machine?
Using a 20V adapter for a 12V machine can potentially damage the machine due to overvoltage. The machine might not be able to handle the higher voltage, leading to malfunctions or even permanent damage. It is important to use the correct voltage adapter to ensure the proper functioning and safety of the machine.
What will happen if you use a 12v DC adapter on a 6v product?
Using a 12v DC adapter on a 6v product can damage the product due to the higher voltage supply. It may cause overheating, overloading, or complete failure of the product. It is important to always match the voltage of the adapter with the requirements of the product.
Ac adapter is it ok to use lower voltage 19v 4.74a ac adapter has died. Can I use a spare I have in the mean time it's output is 12v and 5a?
not unless you want to fry your electronics
Can you use a 12V DC adapter for 5V DC device?
input voltage is strictly according to applications. If use 12V dc adapter power 5V dc device, the 5v dc device would be damaged.
Can you use 12vdc 1000ma adapter to replace 12vdc 120ma?
Yes, you can use a 12V DC 1000mA adapter to replace a 12V DC 120mA adapter, as the new adapter provides a higher current capacity than needed. The device will only draw the current it requires (120mA) from the adapter, so it will operate safely. However, ensure that the voltage matches and that the polarity is correct to avoid damaging the device.
What type of product would a 12v Ac Adapter be used for?
A 12v AC adapter can be use to power devices that requires 12VDC and up to 500mA. It can also be use with electrical devices that require power but do not contain internal components to derive the required voltage and power from the main power.
Can you use 12v ac 60w instead of 12v ac 2a adaptor?
Probably yes. The 12v 2 amp adapter can put out 12x2=24 watts. The 60w adapter can handle more than twice the power (60 / 12 = 5 amps). However, the voltage of inexpensive adapters may be quite a bit higher under low loads. I'd check and make sure the voltage was not very much greater than 12 volts with a 2 amp load.
Can you use a 12v 1500ma switching adapter on a device requiring 12v 3.0A?
No, if your device require 3.0A, 1500ma adapter which is 1.5A is not enough, voltage wise is fine, your adapter adapter will get warm, then overheat, then very likely fail.
