answersLogoWhite

0

whatever one fits, some are torx..

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

What size hex wrench do you need to remove pads off a 1996 Chevy cavalier?

All Cavaliers from about '94 to at least '04 use a 3/8 Allen key for calipers.


What size Allen wrench do you use to remove caliper slide bolts on the front of a ford expedition?

9mm Allen wrench


What size torch wrench tool do you use to remove the calipers from a 99 Chevy s10?

3/8 in drive torx wrench.


What size Allen wrench do you use to remove the front and back brake caliper on a 2006 Lincoln navigator?

To remove the front and back brake calipers on a 2006 Lincoln Navigator, you typically need a 7mm Allen wrench. However, it's always a good idea to double-check the specific fasteners on your vehicle, as variations can occur. Make sure to use the correct size to avoid stripping the bolts.


What wrench do you use to remove front calipers off a 97 Ford F-250?

from memory the correct size wrench is 9/16 inch box


What size Allen wrench do you need to change calipers on a '98 Cavalier?

you can go to any part store specialty tool section look for Chevy brake caliper tool less than 5 dollars To remove the calipers from the mounts it takes a 3/8's hex...use a socket style one...an Allen key would take forever.


What do you use to loosen the front brakes on a 93 Chevy S-10 pick up?

Not to sure what your asking for but if you are trying to remove the front brake calipers so you can replace the brake pads you will need a 3/8" Allen wrench.


What size wrench is needed to remove the brake caliper bolts on a 1991 Honda Accord?

use an Allen wrench not a socket or open or box wrench.


How can I remove a stripped bolt using an Allen wrench?

To remove a stripped bolt using an Allen wrench, you can try using a rubber band or a piece of steel wool to create more grip between the wrench and the bolt. Alternatively, you can use a hammer to tap the Allen wrench into the bolt to create a better grip. If these methods don't work, you may need to use a bolt extractor tool to remove the bolt.


How can I remove a stripped screw using an Allen wrench?

To remove a stripped screw using an Allen wrench, you can try using a rubber band or a piece of steel wool between the screw head and the Allen wrench for better grip. Alternatively, you can use a screw extractor tool to grip and turn the screw out.


What size teX wrench to use to remove front calipers on 2008 mercury mariner?

I needed a Hex 9MM worked great


What size Allen wrench is used to take bolts off of calipers on a 03 Jet ta?

The bolts on the brake calipers of a 2003 Volkswagen Jetta typically use a 7mm Allen wrench. However, it's always a good idea to verify the size, as variations might exist depending on specific models or modifications. Make sure to use the correct size to avoid stripping the bolts.