it will be the polarized sum of the two quantity
An electromagnet if formed by pushing current through a coil. If the circuit is truly open, current will cease to flow, thus no electromagnet.
An electron traveling through the wires and loads of the external circuit encounters resistance.
if the circuit is a series circuit (all loads wired in a single line , one after the other ) then the current will be the same in any part of the circuit . if there are several different paths for the current to take , then each path will carry a different percentage of the total current . when each of these different current values are added together , they will equal the total supplied current.
Yes In parallel circuit , current entering into the circuit will be divided intodifferent paths ( resistances) . Amount of current flow depends upon the magnitude of resistance applied in the circuit. Total current after passing through the circuit will be the sum of all current through each resistance.
The current measured at any point in a simple circuit will be the same because current is the measure of electron flow through a circuit. The current flowing through any branch of any circuit (or an entire simple circuit) will always be the same at any point.
If the circuit is closed the electric current will be closed as well.
An electromagnet if formed by pushing current through a coil. If the circuit is truly open, current will cease to flow, thus no electromagnet.
nothings because they is no wire connected to the circuit so no current can flow through
The voltage drop across each resistance will go up, and the current through the circuit will go down.
Currents are either flowing or they are not. However these lamps are hooked up, series or parallel, the minute current starts flowing through a circuit it is moving throughout the entire circuit.
The resistance is increased, the voltage across each bulb is decreased and the current through the circuit is reduced.
A closed path through which a current can flow is called a circuit. Electric Circuit:)
Because there is many path for flowing current through circuit.
DC = direct current.
Current flows through a complete circuit.
A closed series circuit is one where the current flows through all devices in the circuit. Opening a switch prevents current from flowing in the circuit and it becomes simply an "open circuit". Any device that operates with current (light, LED, motor, etc) will no longer function.
An electron traveling through the wires and loads of the external circuit encounters resistance.