Want this question answered?
if you are refering to the head lights you need to change the head light bulb otherwise where is the light you are talking about
The rear license plate bulbs on a 1996 Olds Cutlass Supreme are replaced by removing the retaining screws, pulling the light assembly out, and disconnecting the wiring harness. The bulb can then be twisted to remove it and a new bulb put in place.
sylvania 561
its not the plug type its the sead beam type take one torqs bit nut loose form thr bulb and the light will come loose
1984 Cutlass Supreme turn signal light bulb replacement: Purchase the correct replacement turn signal light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the turn signal light bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
1990 Oldsmobile Cutlass Supreme headlight bulb lamp replacement procedure: Purchase the correct replacement headlight bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information and full light bulb part numbers list. Then consult your owner's manual for the headlight bulb lamp replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
pull head light clip down remove connector from bulb depress retaining clip extract bulb
How_do_you_replace_the_headlight_bulb_located_on_a_2000_VW_Beetle
No.
To change the front head light you need to unscrew the screws to remove the protective casing. Once the protective casing has been removed the front head light bulb can be replaced with a new one.
no it is where the gray or black part at
To change the front head light you need to unscrew the screws to remove the protective casing. Once the protective casing has been removed the front head light bulb can be replaced with a new one.