22mm
34
You don't need to take the center axel nut off to remove the rotors. Take the calipers off (two 13mm bolts on the back side) and the rotor will pull right off. If it's rusted to the hub you might have to bump it with a block of wood, but they usually just slide off. You only need to take that big center nut off if you're pulling the axel.
18mm Deep style socket.
It is a 36 MM socket
hey i think its a 35mm socket
Usually the size of socket comes in a socket set. Most common size is 5/8.
You need an 18 mm spark plug socket.
You will need a 35 mm socket.
18m thinwalled socket
You will need a 5/8 socket.
a 9/16 are a 15mm
Just did mine, 33mil deep well socket will do the trick.