The solenoid should have two 1/4 to 3/8 studs (one on each side) and one or two small studs (in the front) projecting from it. The positive cable from the battery hooks up to one of the larger studs, and on the opposite larger stud you connect the cable that goes to the starter. Usually only one of the smaller studs in front is used, and a thin wire from the ignition connects to it.
For a 1984 Ford F-150 : DOT 3 brake fluid
In a 1984 Ford E-150 : R12 ( if it hasn't been retrofitted )
diagram of a 1995 ford E150 econ line solenoid switch
Check battery first, then solenoid. Try a jump.
4500 lbs
Bottom of the valve body. Remove tranny pan to get at it
Ford Pickup Starter Solenoid LocationOn my 1989 and 1993 F-150s the starter solenoid is mounted on the right "inner" fender about 6 or 8 inches "aft" of the battery. I suspect yours is there also.
On my 1984 Ford F-150, the rod from the transmission to the accelerator linkage came loose.Hooked it back up and it's doing great.
On a 1993 Ford F-150 : Follow the top radiator hose from the radiator . Where it connects to the engine is the engine cooling thermostat
why does my 1984 ford f150 302 v8 cut out while moving
5 x 5.5
I think the fuse box on 1984 is under the dash, on the drivers side.