0
What allowed some some rain in farming villages to emerge as the first cities?
Wiki User
∙ 9y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Why did farming never emerge in Australia?
There are several reasons why farming never emerged as a dominant mode of subsistence in Australia. The country's unpredictable and variable climate, lack of suitable domesticable plant and animal species, and abundance of natural resources for hunting and gathering may have made farming less necessary for survival. Additionally, Indigenous Australians had developed highly efficient and sustainable methods of foraging and managing the land, which may have made farming practices less attractive.
What will happen in the future about erosion landforms?
scientist say the world will emerge. into one again. but others say the world will end according to the aztec calender. most of the calenders, say the world will end. but the world did not. from my perspective. the world will emerge as it used to and we will be happy. the only thing is we would have differenet animals on either side f each continent. most people wont like it. because we r used to the city ad only birds around us.
What is emerge country?
An emerging country is one that is still growing. They used to be referred to as third-world, but this term is derogatory. Emerging countries often have high population growth rates and a growing infrastructure. They are emerging into the global marketplace, meaning that they are trading and communicating globally at an increasing rate. Examples are India and Brazil.
Step in making concrete hollow blocks?
The production of concrete blocks consists of four basic processes: mixing, molding, curing, and cubing. Some manufacturing plants produce only concrete blocks, while others may produce a wide variety of precast concrete products including blocks, flat paver stones, and decorative landscaping pieces such as lawn edging. Some plants are capable of producing 2,000 or more blocks per hour.The following steps are commonly used to manufacture concrete blocks.Mixing1 The sand and gravel are stored outside in piles and are transferred into storage bins in the plant by a conveyor belt as they are needed. The portland cement is stored outside in large vertical silos to protect it from moisture.2 As a production run starts, the required amounts of sand, gravel, and cement are transferred by gravity or by mechanical means to a weigh batcher which measures the proper amounts of each material.3 The dry materials then flow into a stationary mixer where they are blended together for several minutes. There are two types of mixers commonly used. One type, called a planetary or pan mixer, resembles a shallow pan with a lid. Mixing blades are attached to a vertical rotating shaft inside the mixer. The other type is called a horizontal drum mixer. It resembles a coffee can turned on its side and has mixing blades attached to a horizontal rotating shaft inside the mixer.4 After the dry materials are blended, a small amount of water is added to the mixer. If the plant is located in a climate subject to temperature extremes, the water may first pass through a heater or chiller to regulate its temperature. Admixture chemicals and coloring pigments may also be added at this time. The concrete is then mixed for six to eight minutes.Molding5 Once the load of concrete is thoroughly mixed, it is dumped into an inclinedbucket conveyor and transported to an elevated hopper. The mixing cycle begins again for the next load.6 From the hopper the concrete is conveyed to another hopper on top of the block machine at a measured flow rate. In the block machine, the concrete is forced downward into molds. The molds consist of an outer mold box containing several mold liners. The liners determine the outer shape of the block and the inner shape of the block cavities. As many as 15 blocks may be molded at one time.7 When the molds are full, the concrete is compacted by the weight of the upper mold head coming down on the mold cavities. This compaction may be supplemented by air or hydraulic pressure cylinders acting on the mold head. Most block machines also use a short burst of mechanical vibration to further aid compaction.8 The compacted blocks are pushed down and out of the molds onto a flat steel pallet. The pallet and blocks are pushed out of the machine and onto a chain conveyor. In some operations the blocks then pass under a rotating brush which removes loose material from the top of the blocks.Curing9 The pallets of blocks are conveyed to an automated stacker or loader which places them in a curing rack. Each rack holds several hundred blocks. When a rack is full, it is rolled onto a set of rails and moved into a curing kiln.10 The kiln is an enclosed room with the capacity to hold several racks of blocks at a time. There are two basic types of curing kilns. The most common type is a low-pressure steam kiln. In this type, the blocks are held in the kiln for one to three hours at room temperature to allow them to harden slightly. Steam is then gradually introduced to raise the temperature at a controlled rate of not more than 60°F per hour (16°C per hour). Standard weight blocks are usually cured at a temperature of 150-165°F (66-74°C), while lightweight blocks are cured at 170-185°F (77-85°C). When the curing temperature has been reached, the steam is shut off, and the blocks are allowed to soak in the hot, moist air for 12-18 hours. After soaking, the blocks are dried by exhausting the moist air and further raising the temperature in the kiln. The whole curing cycle takes about 24 hours.Another type of kiln is the high-pressure steam kiln, sometimes called an autoclave. In this type, the temperature is raised to 300-375°F (149-191°C), and the pressure is raised to 80-185 psi (5.5-12.8 bar). The blocks are allowed to soak for five to 10 hours. The pressure is then rapidly vented, which causes the blocks to quickly release their trapped moisture. The autoclave curing process requires more energy and a more expensive kiln, but it can produce blocks in less time.Cubing11 The racks of cured blocks are rolled out of the kiln, and the pallets of blocks are unstacked and placed on a chain conveyor. The blocks are pushed off the steel pallets, and the empty pallets are fed back into the block machine to receive a new set of molded blocks.12 If the blocks are to be made into split-face blocks, they are first molded as two blocks joined together. Once these double blocks are cured, they pass through a splitter, which strikes them with a heavy blade along the section between the two halves. This causes the double block to fracture and form a rough, stone-like texture on one face of each piece.13 The blocks pass through a cuber which aligns each block and then stacks them into a cube three blocks across by six blocks deep by three or four blocks high. These cubes are carried outside with a forklift and placed in storage.Quality ControlThe manufacture of concrete blocks requires constant monitoring to produce blocks that have the required properties. The raw materials are weighed electronically before they are placed in the mixer. The trapped water content in the sand and gravel may be measured with ultrasonic sensors, and the amount of water to be added to the mix is automatically adjusted to compensate. In areas with harsh temperature extremes, the water may pass through a chiller or heater before it is used.As the blocks emerge from the block machine, their height may be checked with laser beam sensors. In the curing kiln, the temperatures, pressures, and cycle times are all controlled and recorded automatically to ensure that the blocks are cured properly, in order to achieve their required strength.The FutureThe simple concrete block will continue to evolve as architects and block manufacturers develop new shapes and sizes. These new blocks promise to make building construction faster and less expensive, as well as result in structures that are more durable and energy efficient. Some of the possible block designs for the future include the biaxial block, which has cavities running horizontally as well as vertically to allow access for plumbing and electrical conduits; the stacked siding block, which consists of three sections that form both interior and exterior walls; and the heatsoak block, which stores heat to cool the interior rooms in summer and heat them in winter. These designs have been incorporated into a prototype house, called Lifestyle 2000, which is the result of a cooperative effort between the National Association of Home Builders and the National Concrete Masonry Association.Read more:http://www.madehow.com/Volume-3/Concrete-Block.html#ixzz2PUqY9zNA
How was farming necessary for the first American civilizations to emerge?
Farming was necessary for the first American civilizations to emerge because it allowed for the development of settled societies. The ability to domesticate plants and animals provided a stable food source that supported larger populations and allowed people to live in permanent settlements. This led to the formation of complex social structures, the development of specialized occupations, and the emergence of cultural advancements.
What were the earliest craft industries to emerge and how did they benefit those in neolithic villages?
Mrs. Higbe too huh?
Where the first cities to emerge?
damnit sumone tell me hahahahahahahahaha
What were the earliest craft industries to emerge and how did they benefit those living in Neolithic villages?
Mrs. Higbe too huh?
What allowed China to emerge?
One little crack in their protectionist shell, and there they are!
What were two of the first and largest cities to emerge in Europe?
u and ur mama
What are in the Neolithic communities?
In Neolithic communities, you would typically find settled agricultural societies, with people living in permanent villages or towns. These communities would engage in farming, domestication of animals, pottery-making, and early forms of trade. Social structures would emerge, with division of labor and possibly emerging social hierarchies.
How was farming necessary for the 1st American civilizations to emerge?
it was necessary for them so they can survive in the desert Southwest,sorry if wrote anything wrong
Where did the highest concentration of cities in Mesopotamia emerge?
areas where the Tigris and the Euphrates flowed closely together and intersected
How did the first cities emerge?
THE frist cities emerged afther farmers began cultivating fertile lands along river valleys and producing surplus,or extra,food.
Why is farming the most important step towards civilization?
Farming is considered a crucial step towards civilization because it allowed humans to settle in one place, establish permanent communities, and develop elements of early civilization like social structures, division of labor, and trade. The ability to grow crops provided a more reliable food source than hunting and gathering, leading to population growth and the foundation for more complex societies to emerge.
What city is nicknamed little Chicago?
16 American towns and cities emerge that earned the same dubious distinction during the Prohibition Era, including Hamilton, Warren, Canton, Youngstown and Lima (cities in Ohio).
