Most subwoofers have their own power source. There are subwoofers called "passive" woofers that will be powered by your amplifier.
Yes this amplifier works with a variety of subwoofers with various ohm loads. The amplifier will product the same power at 1.5 - 4 ohms making this a great choice for most subwoofers.
There are two types of subwoofers. 1. Active subwoofers 2. Passive subwoofers An active subwoofer will have a built-in amplifier. A passive subwoofer doesn't have a built-in amplifier which will require the use of an amplifier, the use of a power source.
depends on where your putting them and what kind they are
It depends on the specific power-handling capabilities of the subwoofers and their impedance. If the subwoofers have a total power handling capacity that is lower than 300 watts and the amplifier can provide enough power at the required impedance, then it should be able to adequately power the two tens. However, if the subwoofers have a higher power handling capacity or the amplifier cannot provide enough power, it may not be sufficient.
A Rockford 250 watt amp would compliment a 12" Subwoofer very nicely.
consider getting a lower powered amplifier or subwoofer that doesn't strain your cars electrical power.
There are a bunch of important factors to consider prior to buying an amplifier for a vehicle. Primarily, you must decide what the amplifier will be primarily used for. If the amplifier will be used for powering subwoofers it would be good to consider the bridged or mono capabilities as well as ohm ratings of the amplifier as well as the draw, or amount of power the amplifier will pull from the car's electrical system. The most important factor in considering an amplifier for powering subwoofers is probably output watts, which will determine the amplifier's power to the speakers and the amount of bass to be transmitted. If the amplifier is to be used to power mid or high range speakers, a multi channel (four or more) amplifier should be considered because of the ability to run multiple sets of speakers or component sets off of the different channels of the amplifier. The considerations inherent to the subwoofer amplifier are also present including watt ouput and power draw, but when selecting a multi cha
Find out what the rms is for that sub woofer,if it'1000 then find out what the max is,then you could go between the rms power and the max power to get the right amount of watts.
no, a factory CD player can be used in a vehicle that has subwoofers attached. as long as the factory CD player in the vehicle has treble, bass, and subwoofer controls on it, it will be fine. if not, an aftermarket CD player will be the solution. with subwoofers, you need to control the amount of power that are ran through them. the amplifier is a control, but if not set correctly on the CD player, you could blow your subwoofers.
Unpowered subwoofers take power from the receiver itself whereas a powered subwoofer has its own amplifier. This helps takesome strain off the receiver so powered subwoofers are considered a better option.
The subwoofer is the actual speaker making the loud bass. The amplifier is what powers the subwoofer and makes it work how it does. It only uses the low frequencies from the audio source and amplifies it.