0
to connect similar devices..like one switch to another switch
What else can I help you with?
What is the diffirence between Cross cable and state cable?
The difference between a cross cable and a state cable is that a cross cable, or crossover cable, is used specifically to connect two of the same devices.
How do you use switch to switch cable?
cross cable
Which of the cable are used to connect two computers?
Cross cable.
What cable is used to connect a modem and a switch?
cross cable
How do you find cross sectional area of cable when you have the lent current and the voltage drop?
cross sectional area of cable * voltage drop
Does it matter if the cable wires cross over?
No, it does not matter if the cable wires cross over. It should not cause any problems if they cross over. However, there are several products that allow them to cross over to add on benefits.
What type of monitor cable was connected to the laptop?
Ethernet cross-over cable
What kind of cable is needed to connect a switch to a switch?
cross over cable
How can one identify a cross-over cable?
Match up the two ends of the cable. Look closely at the color coding of the pins at both RJ-45 connectors. If the same colors are used in the same pin positions then the cable is a straight-through cable. If they are reversed at both ends then it is a cross-over cable.Sometimes the cable will be marked that way on the outside covering of the cable. Look for the words "cross-over cable".
What does 1.5mm and 2.5mm in mains cable refer to?
The 1.5mm and 2.5mm in mains cable refer to the cross-sectional area of the conductors, specifically the copper or aluminum wires within the cable. This measurement indicates the thickness of the wires, which affects the cable's current-carrying capacity and resistance. Generally, a larger cross-sectional area (like 2.5mm) can handle higher electrical loads safely compared to a smaller one (like 1.5mm). Therefore, the choice between these sizes depends on the electrical demands of the application.
Compare the advantages and disadvantages of cross cable and straight cable connection?
1. straigth cable are more effective than the crossover cable....
Which straight or cross cable is used for the configuration of router?
neither, you need a rollover cable
