Alloys can add corrosion resistance to a metal
brass, steel and bronze are the most common alloys. they are made of: brass: 35% zinc and 65% copper - uses, musical instruments steel: 99% iron and 1% carbon - uses, tools, car bodies etc bronze: 87.5% copper and 12.5% tin - uses, boat hardware and screws etc some not so common alloys are alnico (aluminium and nickel and cobalt - used to make magnets) and stainless steel (18% chromium, 80.6% iron, 1% nickel and 0.4% carbon - used to make surgical tools and tableware and cookware.)
Alloys are useful improvement over pure metals because they tend to be stronger.
Sleeve bearing
The bearing number can be checked out depends on the size of ID (Inner Diameter), OD (Outer Diameter) and H (Height) of this bearing.
Henry Norman Bassett has written: 'The chemical technology of steam-raising plant' -- subject(s): Steam power-plants 'Bearing metals and alloys' -- subject(s): Alloys, Bearings (Machinery)
1 Alloys of magnesium2 Alloys of aluminum3 Alloys of potassium4 Alloys of iron5 Alloys of cobalt6 Alloys of nickel7 Alloys of copper8 Alloys of gallium9 Alloys of silver10 Alloys of tin11 Rare earth alloys12 Alloys of gold13 Alloys of mercury14 Alloys of lead15 Alloys of bismuth16 Alloys of zirconiumBUT I AM SURE WHAT THEY ARE MADE OF I HOPE THIS HELPS :)
Cast alloys are alloys that are cast in a cast.
Nickel Babbitt is a proprietary poured bearing alloy. It contains tin, antimony, zinc, and about 0.5% nickel (alloys of this class are referred to as XXXX Nickel). It has low friction and has high thermal conductivity to resist high temperatures. Other babbitt load-bearing alloys may include lead and copper. One alloy used by Henry Ford for crankshaft bearings was 86% tin, 7% copper, and 7% antimony.
The below is according to Wikipedia.1 Alloys of aluminium2 Alloys of bismuth3 Alloys of cobalt4 Alloys of copper5 Alloys of gallium6 Alloys of gold7 Alloys of indium8 Alloys of iron9 Alloys of lead10 Alloys of magnesium11 Alloys of mercury12 Alloys of nickel13 Alloys of potassium14 Alloys of plutonium15 Rare earth alloys16 Alloys of silver17 Alloys of titanium18 Alloys of tin19 Alloys of uranium20 Alloys of zinc21 Alloys of zirconiumFor the source and more detailed information concerning your request, click on the related links section (Answers.com) indicated directly below this answer section.
Alloys are mixtures
There are many more than two types of metal alloys. There are aluminum alloys, titanium alloys, magnesium, iron (steel); there are alloys of pretty much any metal out there
you
The plural of alloy is alloys.
c*nt
Alloys doesn't have a low conductivity.
Alloys can add strength to a metal