I Believe They Are Around 40-48 Newton Metres
1300 citi golf cam shaft torque settings
what torque specs on cam shaft bolts 2000 saturn 2.2
what torque specs on cam shaft bolts 2000 saturn 2.2
the torque for the cam shaft are 9lbs/foot
Torque cilinder head Hyundai 1500 accent
no, the cam shaft is on the engine cylinder head..
if it is dule overhead cams the only thing to adjust is cam end play witch should be 0.003-0.009 and the cam shaft bolts should be tighten to 12 ft.lbs (67 nm)
The sensor on the CAM SHAFT!
this probably means you have a worn cam shaft or cam shaft or the arm that hits the cam shaft to open the valve is worn. this is internal on the engine.
Cam spins at half the speed of the engine.
cam chains are a chain the attach to the crankshaft and the cam shaft , the crankshaft is the shaft making the pistons go up and down the cam shaft makes the valves open and close, the crank shaft and cam shaft have to be aligned a certain way or the car will not fire, this is called "timing" . if your looking for where it is , its most likely in the front of the engine get a pro to look at it.
Rover 20T2N 2.0Ltr Diesel engine Cam cover torques are listed as 12 Nm. No tightening sequence is listed .