valves do retreat into heads that is why a clearance should be just cqause a gap wont show it still needs it
Both the 1.5 & 1.6 Ltr. engines use "Hydraulic Valve Lash Compensators" No tappet settings are provided.
If it is the same as the 2000 Daewoo Lanos, it will be located inside the car on the passenger side. You will have to remove most of the lower dash (black plastic) to find it, there are about 30 (7 mm) screws that need to get removed and the fan will have to come out to access the expansion valve block. The expansion valve itself is held in place with (2) 8mm bolts.
You cannot manually test the EGR valve like you can with most ie. applying vaccum and depressing the diaphram. The EGR valve is controlled by the ECM you must have an OBD-2 compliant scan tool to montinor EGR functions.
Most likely the valve cover "Gaskit" and/or the "O ring" bolt seals need replacing. Regards, C-F
I had this problem on my R reg Lanos. It was the Idle Air Control valve letting too much air into the engine. My mechanic simply cleaned it and it has been fine ever since. If it needs replacing they are about £100.
you need a turbo first!!
hoe tdo you change a valve cover gasket on a daewoo nubira
Where is pcv valve on 1998 daewoo leganza
yes
breather pipes.
4age 16Valve 130 Hp Jdm version, 113 Hp USdm version
I need the valve settings for a 17 hr. Briggs mod. 311777 type 0131-e1 code 980521zd THANKS DENNIS