Want this question answered?
The amount of pressure you need to tighten nuts or bolts.
threre are different bolts with different specs and a bolt pattern. Buy a manual.
For all the 2.3, 2.4L QUAD 4 engines, the head bolts are Torque to Yield. The porper torque value is 30ftlbs PLUS a 90 degree turn of the wrench. The bolts must be new every time ( NEVER REUSE OLD BOLTS). The torque values and proper sequence are including in the box the new bolts come with. BUT honestly, the torque value is 65ft lbs like all GM Chevy motors have been for eons.
the correct torque for these bolts is as follows: 96lbs
10mm bolts torque to 18 Ft-lbs 12mm bolts torque to 22 Ft-lbs
Front caliper mounting bracket bolts torque to 57ft-lbs Front caliper pin bolts torque to 27ft.lbs Rear Caliper mounting bracket bolts torque to 38ft-lbs Rear caliper pins torque to 15ft-lbs
torque specifications
torque for 2c engine cylinder head bolts
I FOUND THIS AT WWW.AUTOZONE.COM, CLICK ON VEHICLE SPECS . For your 1999 CHEVROLET TRUCK BLAZER 2WD: INTAKE BOLT TORQUE FOOT POUNDS (FINAL TORQUE) TORQUE LOWER MANIFOLD BOLTS TO 27 IN/LBS TORQUE LOWER BOLTS TO 9 FT/LBS TORQUE LOWER BOLTS TO 11 FT/LBS TORQUE UPPER MANIFOLD BOLTS TO 44 IN/LBS TORQUE UPPER MANIFOLD BOLTS TO 7 FT/LBS (TO TORQUE BOLTS & NUTS, START IN CENTER USING CRISSCROSS PATTERN)
torque setting for cylinder head bolts for a skoda felicia
Brake caliper bolts torque is 90ft-lbs. Wheel Lug Nut torque is 83ft-lbs. Brake caliper bolts torque is 90ft-lbs. Wheel Lug Nut torque is 83ft-lbs.
torque wrench