0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What are the types of tool post?
the types of tool post on lathes can be classified as single screw tool post four bolt tool post open side tool post four way tool post
What is a square tool post?
tool post is used to handle the tool on the lathe machine
What is an American tool post?
An American style tool post is a square tool post designed for a center lathe. It can be rotated, is square and dove-tailed on all four sides. The dove tails allow tool holders with cutting tools clamped in it to be inserted and locked in place. This style of tool post decreases production time due to its ease of function and preset tool center heights.
What degree of angle is the tool post for chamfering?
If you are using a 45 degree tool there's no need to set the tool post and you can just cut it by feeding the cross slide. If you are physically going to cut a chamfer with the compact slide, then you should set your tool post to 45 degrees.
Why is it necessary that the tool be clamped tightly in the tool post?
If the cutting tool is not tightly clamped in the tool post it could move when a cut is taken. This can result in the tool penetrating the workpiece as the cut progresses causing an undersized workpiece. It can also eventually bite into the workpiece and possibly cause damage to the workpiece, the lathe, the cutting tool and even injury to the machinist and others in close proximity.
What are the advantages and disadvantages of standardization in manufacturing?
The advantages of standardization in manufacturing are cost effectiveness and integration. Standardization of lathe cutting tool stock sizes and tool post mounts for instance allow tool post manufacturers to cover a huge range of lathe designs and uses with a single product, whereas otherwise a potentially huge range of tool post products might be required to furnish the functionality of a given tool post design to diverse lathes and cutting tool dimensions. The basic potential disadvantage of standardization in manufacturing is that it may lock in obsolescence. Tool stock developments may for instance render tool posts designs obsolete for the advantages of new tools, or a given tool post mount design may for instance preclude using the advantages offered by new tool post designs, which thus makes the lathes obsolete. Because good system designs can exercise foresight to ensure long term non-obsolescence, there are usually general advantages to be realized from standardization wherever a fitting, universal vision for standardization can be conceived.
What are the types of tool post?
the types of tool post on lathes can be classified as single screw tool post four bolt tool post open side tool post four way tool post
What is a square tool post?
tool post is used to handle the tool on the lathe machine
What tool is a square?
tool post is used to handle the tool on the lathe machine
What is the function of a tool post of a lathe machine?
The tool post allows the user to control a cutting tool (such as a chisel) more accurately - to produce better results. The tool post holds the lathe tools that will be required for each cutting operation required in that part of teh production process. Each post can hold up to four differing tolls - example. Facing tool, knurling tool, long reach internal cutter and then a parting tool. The tool post rides on the saddle on a horizontal plane and the in a cross feed. Most tool feeds can be set to automatic where cutting speed is set and the movement of the post on the saddle automated
What is an American tool post?
An American style tool post is a square tool post designed for a center lathe. It can be rotated, is square and dove-tailed on all four sides. The dove tails allow tool holders with cutting tools clamped in it to be inserted and locked in place. This style of tool post decreases production time due to its ease of function and preset tool center heights.
What are the function of tool post?
This is the place to close on the lathe cutting tool.
What degree of angle is the tool post for chamfering?
If you are using a 45 degree tool there's no need to set the tool post and you can just cut it by feeding the cross slide. If you are physically going to cut a chamfer with the compact slide, then you should set your tool post to 45 degrees.
In nutrition tool what are the advantages and disadvantages of food group?
what are the disadvantages and advantages tools in nutrition? what are the disadvantages and advantages tools in nutrition?
How do you assemble tool post?
ilA inasaH
What is discussion board?
a tool that lets you post a comment
What is a discussion board?
a tool that lets you post a comment
