The color codes for a 2007 Hyundai Sonata Stereo wiring harness are usually yellow pr green, red or brown, and black or blue. These different color codes are basically used for connection purposes.?æ
you need to pop out the frame and unscrew the radio. You will need a wiring harness for an after market stereo.
http://www.modifiedlife.com/2003-hyundai-sonata-car-radio-stereo-audio-wiring-diagram/
you need a dash kit. go to your local stereo shop and they should stock the hyundia kit. any single din size stereo will fit.
buy the wiring harness adapter for 14.99
there are a number of stereo wires but if you are installing a new stereo, it is worth buying the installation kit.it comes with a harness that will match all wires.
Here is a site on eBay http://cgi.ebay.com/Stereo-Wire-Harness-OEM-Chevy-Monte-Carlo-86-87-88_W0QQitemZ110032845206QQihZ001QQcategoryZ64579QQrdZ1QQssPageNameZWD1VQQcmdZViewItem This is a reverse wire harness. Plug it into your car's original harness that went to the factory stereo. The wires that come out of the harness are labeled so they can be easily connected to your new stereo. If you don't want to order the harness, the link has the original color diagram, so if you think you can manage, don't order the plug and just look at the colors and what they coorespond to and plug them into your new stereos harness. Also on eBay or many other places, there are stereo adaptors. This will hold your stereo and it will look much better than a do it yourself job. Plus they screw into the original holes. Hope this helps.
there is a harness that connects the speakers, the stereo and any power (extras bought) in a single bunch. most stereo kits make adapters that fit on the back of an aftermarket stereo so you don't have to cut the harness. however, it is a tight fit behind the stock stereo because of a plastic backing built into the dash. recommend to not cut the harness and find a way to fit it all (adapter, new stereo harness, stock harness) into the space provided.
http://www.modifiedlife.com/request-a-hyundai-car-radio-stereo-wiring-diagram/
The wiring diagram has four wires. Brown wire for parking lights, green and yellow wire for for stop light and white wire for common ground.
To change car stereos, you will need to remove the bezel or cover from the stereo in the vehicle. Then, pull the stereo out of the dashboard and remove the wiring harness. You can then attach the new stereo to the harness.
Attached the wiring harness and the antenna cable to the back of your stereo. Slide the stereo into the stereo slot. Tighten the stereo with the stereo retaining screws.
Factory stereos in a 1998 Hyundai is held in place by a mounting bracket found inside the center console. Remove the center console to reach the mounting bracket. Loosen the mounting screws and pull the radio forward. Pull the radio harness from the cabin wire harness and remove the radio.