Want this question answered?
The head bolt torque for the Dodge 6 cylinder and V-8 engines is 50 ft. lbs. torque. If it is a diesel engine, the torque is 90.4 ft. lbs. Tighten the bolts by working from the center out, and alternating side to side. This prevents warping of the head.
Is the 4 cylinder engine on a 1987 Camry noninterference?" Is the 4 cylinder engine on a 1987 Camry noninterference?"
The 1987 Nissan cylinder had bolt torque specification is 140 pounds. The cylinder head bolts should be torqued in 45 pound intervals.
For the 1987 Chevrolet S-10 with a 2.8 liter engine, the torque specs for the cylinder head bolts is 40 ft. lbs. The torque specs for the crankshaft damper bolt is 70 ft. lbs. For the oil pump bolts and the oxygen sensor, the torque is 30 ft. lbs.
what is the correct torque for a Toyota Corolla engine - 4E-FE, 1st generation engine?
2.6l 4 cylinder
== ==
Torque Value For 1987 R22, Per Haynes Manual - 58 ft lbs.
Looking at the engine, the #1 cylinder will on your right hand side of the block, very first cylinder.
No , the 1.6 liter 4 cylinder engine in a 1987 Toyota MR2 is not an interference engine
Torque as follows 53-63 ft/lbs. in 3 steps
For the Z24i and KA24 engines, the "cylinder head to front cover" torque specification is 3 to 8 foot-pounds (or 4 to 10 Nm)