Want this question answered?
The sub-cooling or under-cooling in the saturated liquid line increases the refrigeration effect or cooling effect, thus the COP of VCR system increases.
It is a refrigeration unit based on Vapour Absorption Refrigeration Cycle (typically refrigerants used are Water or Ammonia).
usually the refrigerant you have pumped out of the system is contaminated (either liquid/air) contaminated refrigerant is less efficiant and will lead to a short system life. refrigerant is works kind of like the rain in a water cycle. The system starts at the compresser (the heart of the system) pushing refrigerant in to the condenser (like condensation in the clouds) condensing to a liquid and heads toward the metering device (raining) The metering devise rapidly lowers the pressure of the system into the evaporator (get the picture already?) where the refrigerant collects the heat in the refrigerated space and boils into a vapour releasing it to out side the refrigerated space. obviously there is more detail then this but thats the basic operation.
There are two basic cycles of Airconditioning/Refrigeration 1. Vapour compression cycle, 2. Vapour Absorption Cycle Vapour compression cycle is used in most of the airconditioning applications but ofenly vapour absorption is used. evaporator, compressor, throateling valve, tank & condensor are the major parts of this cycle.
water vapour is produce during respiration
The sub-cooling or under-cooling in the saturated liquid line increases the refrigeration effect or cooling effect, thus the COP of VCR system increases.
Mahit Nahi
Brian Mongey has written: 'The experimental evaluation of a ternary mixture as an alternative to R22 in the vapour compression refrigeration cycle'
in orde to reduce the pressure........cming from the evaporator
It is a refrigeration unit based on Vapour Absorption Refrigeration Cycle (typically refrigerants used are Water or Ammonia).
In vapour compressor refrigeration system the low pressure and temperature vapour refrigerant from evaporator is compressed. where it is compressed to a high pressure and temperature. From compressor refrigerant goes to condenser where where it changes the phase. from condenser refrigerant goes to evaporator through expansion device.
In vcrs system there is a phase conversion system i.e. liquid state to gases state and this happens with latent heat of working medium but on the other hand there is only gases expansion on expander cylinder and no phase changes occurs and in cylinder we can not expend two phase system..
Disadvantages of sodium vapour discharge lamp
To minimize sweating of the air around the pipe. When the air comes in contact with a cool surface, its water vapor condenses!
See my answer to~How does air conditiong work~ on this site.
the sun heat up the water
G. A. Hewett has written: 'Mechanical heat pump (vapour compression refrigerator)'