Want this question answered?
Electrical wire size is directly dependant on the load amperage that is connected to it. The higher the load amperage, the larger the cross sectional area of the wire needs to be. The connected amperage to a conductor is determined by a group of electrical experts and their results are then written into the latest addition of the electrical code book of the country in which you live.
You can measure the electrical current with an amp meter. Amperage measures the current flow.
The unit of electrical resistance is the Ohm. It's written as the Greek capital Omega:Ω1 ohm = 1 amp per volt
The only requirement would be the distances in front and on the sides of the service boxes for access. 3 feet.
it is not a good idea. the alternator is selected to meet the needs of the electrical system. Check to see what the maxium amp load is. It may cause a fault light to show up. the computers are set up for specific amps. Check to see if similar Volvo models of the year use a 70 amp alternator. hope it helps. duboff Rolfo says: I have done this with acceptable results, although I will agree that it is not recommended. If you must use a different amperage go for more amps, not less.
Supply voltage , temperature , frequency are factors that effect the electrical parameters of opamp
Supply voltage , temperature , frequency
Amp is short for Ampere, the unit of electrical current.
amphere
CURRENT
Current.
A 15 amp 125 volt outlet is a household outlet.
ampere. It measures electrical current.
An electrical ammeter.
Amperes of electrical current.
Most apartments have a 60 amp panel for their electrical distribution.
It can destroy the amp, or it can destroy the electrical system.