answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: What are the losses for under ground armored cable?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Natural Sciences

Why is it hot under the ground?

it is hot under ground because volcanos are under ground


How many wires are in a extension cord?

If you are construction an extension cord make sure that the ends go on the right end of the cable. Match the wire end when looking at it, to the proper pin configuration of the plug. Looking at the plug from the blade side directly on you should see a larger blade (silver) on the right, smaller (brass) blade on the left and a U shaped ground blade on the bottom. The white wire connects under the right (silver) coloured screw, the black wire connects under the left (brass) coloured screw and the green wire under the green ground screw. Looking at the end of the cable it should be matched to this configuration. If it doesn't look at the other end of the cable. No wires should cross when connecting to the blades on the plug, if they do you have the wrong end of the cable.


How to assemble a extension wire?

If you are constructing an extension cord make sure that the cap ends go on the right end of the extension cable. Match the wire cable end when looking at it, to the proper pin configuration of the plug. A non locking plug will be a 6-30P or a locking plug will be a L6-30P. On a 6-30P plug (cap), black wire to the left blade, white wire to the Y terminal and the green wire to the G terminal. On a L6-30P plug, black wire to the X terminal, white wire to the Y terminal and the ground wire to the G terminal. Looking at the end of the cable it should be matched to this configuration. If it doesn't, look at the other end of the cable. No wires should cross when connecting to the blades on the plug, if they do you have the wrong end of the extension cable and the polarity will be wrong when plugged into a receptacle.


How is electricity transported?

by wires under ground under neath my feet


What is the depth requirement for an under ground electric house wire?

It depends on the voltage and if it is a branch ciriut or a service. If it is under 30 v olts 6 inches will work. If it is 120 volt branch circiut it needs to be on a GFI, on a 20a breaker and either in a condiut or uf cable to be 12 in . If it is not on a gfi , and it is over 20 a then it must be 18 in. Regardless the wire must be in condiut or be of UF cable to make it water tight.

Related questions

Where are the cable put under ground?

under grond


What is armored cable made from?

Armored electrical cable contains insulated electrical service wires protected by a flexible steel covering. Unarmored electrical cable has no protective flexible steel covering, its covering is made of plastic. <><><> Armored cable (BX) is the older version of Metal Clad cable (MC). It was flexible steel covered wire that used the steel as it's Ground. BX was a poor grounding system so it was replaced with MC which looks similar but has a separate Grounding conductor. MC is most often made with aluminum as its cover. Armored cable if used today will refer to MC type wiring. <><><> Some kinds of armored cable are in fact made to a tougher standard than the ordinary soft wire strand types of shielded cable that are used for hooking-up antennas. The 'armor' is actually a thin flexible metal film that better protects the wire or wires inside from damage in high use or high traffic areas. Such kinds of armored cable are also used in radio frequency assemblies in electronic equipment.


Why does the Battery die 97 Cadillac Catera?

ground cable under the car. you need a good ground from engine to frame.


What is the meaning of A2xcfy in cables?

A2XFY cable is a type of cable that is armored. It is particularly used for earthing, and other electrical uses like mechanical protection.


Where do you hook up a battery ground strap?

Maybe you mean cable. You can bolt a car battery cable to the block of the engine. Usually under the exhaust manifold.


When armored cable is used what protection is provided at the cable end?

these little devices are generally called connectors when you cut the armor it leaves some burs so there a little fiber bushing you slip under the armor and over the wire before putting in into the connector and into the box rome cable company had a armored cable they called BX which kinda stuck the generic term is MC for metal clad MC Cable Connectors <<>> These little red bushings that come with rolls of BX cable are called anti-shorts. <<>> the little bushings are also called redheads


What do you have to do to get a armored car on Mafia Wars?

Actually "The armored car" is in New York..Under the Hitman tier... "Invade Tong-controlled Neighborhood"


How do you get armored cars or armored state cars on Mafia Wars?

There are 2 different Armored Cars in game.The first is an 'armored car' you get by doing the job Invade Tong Controlled Neighborhood under the Hitman tier in New york.The second one is a 'Armored State Car' which you loot in the Storm The Presidential Palace job under the El Padrino tier in Cuba.El Padrino mission - Storm the presidential palace


Where is the engine Ground wire for 1973 corvette?

From the battery to frame directly under the battery box. From the frame to the engine at the motor mounts with a short ground cable. Usually on the drivers side.


What causes the meter fuse to blow in a 94 altima?

The short is under your battery tray. Find where your ground cable (The negative cable on your battery) screws to the engine block. Trace this ground cable to where it goes under your battery. It crosses over a wire with two connectors (this is your neutral safety switch). This is where your short will be, the crossing cables rub each other down to the wire. Tape both wires and insulate with rubber and you should be good to go.


How to measure electrical under ground power cable sizes?

The current can be monitored at either the head end of the under ground run or at the downstream exit point adjacent to the load. A clamp on portable meter is usually used for this job.AnswerIn Europe, underground power cable conductors are measured in square millimetres; in North America, they are measured in circular mils or multiples thereof.


Why is it hot under the ground?

it is hot under ground because volcanos are under ground