a circuit with many resistances.
Sugar is not used in electrical circuits.
virtual circuit
Capacitive reactance.
Reducing the resistance of solar cells increases the output current. Although the voltage remains the same the current is effected due to internal resistance. A reduction in output current can result in lesser diminished functioning in household appliances.
Actually the wire WILL get hot, but specifically HOW MUCH it gets hot depends on the current, and on the resistance of the wire.In most circuits, the resistance of the wire (and thus, the amount of heating) is insignificant, and can safely be ignored for most calculations.
They are not exactly the same. A series circuit is one complete circuit with not other pathways. A parallel circuit is a complete circuit with multiple pathways . The resistance of a parallel circuit is completely different from the resistance of a series circuit. Therefore, this affects the voltage and the current produced,
no we not use resistance in place of diode.
By connecting components in series, you are increasing the equivalent resistance (known as thevenin resistance) of the circuit. Power is equivalent to Voltage^2 / Resistance. Therefore, by increase the resistance, you are decreasing the amount of power provided by the source.
D. The total resistance is equal to the lowest resistance in the circuit
Resistance applies to both d.c. and a.c. circuits, and is determined by the resistivity, length, and cross-sectional area of a conductor.In d.c. circuits, resistance is the only opposition to the passage of current. However, in a.c. circuits, the flow of current is opposed, not only by resistance, but also by reactance. Reactance is caused by a circuit's inductance or capacitance, or both, and varies with the frequency of the supply. Like resistance, reactance is also measured in ohms.So, in a.c. circuits, the combination of resistance and reactance is called 'impedance'.Impedance is not the algebraic sum of resistance and reactance, but the vectorial sum. So if, for example, an a.c. circuit had a resistance of 3 ohms and a reactance of 4 ohms, the impedance would be 5 ohms, not 7 ohms.
Sugar is not used in electrical circuits.
The opposition of current flow is measured in ohms. For DC circuits it is resistance and for AC circuits it is impedance.
As we know V=IR, by changing the voltages in the two different circuits, we can maintain the same current even we have different resistance.
Parallel circuits have a higher current and a lower resistance.
A short circuit.
Using superposition theorem.
Series circuit gives higher resistance compared to parallel circuit.