if its h22a engine intake are 0.15-0.19mm (0.006-0.007in) ,exhaust 0.17-0.21(0.007-0.008)
At the factory we set the tappet clearance to 200 microns plus or minus 20 microns. This applies to all L4 and V6 engines. The Prelude is built in Japan, but I would assume that the settings are the same.
Please reask question: Where are the VALVES ON A 1989 HONDA? How many VALVES ON A 1989 HONDA? How do I adjust the VALVES ON A 1989 HONDA?
The exhaust valves should have .005 inches of clearance, and the intake valves should have .004 inches of clearance.
Intake and exhaust valves have the same clearance: 0.10 mm (0.0004 in).
Honda Prelude was created in 1978.
Yes you can I have 1988 Honda prelude with the 2.0L in it.
Yes, the fourth generation prelude should have identical hoods regardless of the year. Call your local dealer or consult a OEM parts vendor to make sure the parts numbers match.
yes
The H22 engine, which are found in 1997 Honda Preludes, are interference engines. This means that the valves and pistons do indeed make contact as the engine is on.
Does a 1998 Honda prelude have a clutch cable
Honda stopped making the prelude in 2001.
As of this writing, there are no reports that the Prelude model will be revived by Honda.
No, the Honda Civic springs is not compatible with any generation of the Honda Prelude.