Want this question answered?
Black electrical wire is used for power in all circuits. Any circuit's black wire should be considered hot or live. Black wire is never used for a ground or neutral wire and should be used as the power feed for a switch or an outlet. A black wire is often used in a circuit as a switch leg, the connection that runs from the switch to the electrical load. Red electrical wire indicates the secondary live wires in a 220-volt circuit, used in some types of switch legs and in the interconnection between smoke detectors that are hard-wired into the power system. You can connect a red wire to another red wire or to a black wire.
No, there are different occasions when the red of a three wire cable gets used as a hot wire. There also times when the white wire gets used as a hot but has to be re identified as a hot with marking tape. When wiring baseboard heaters the cable used is red and black with no white wire in the set.
Red wire=positive Black wire=negative
Yes, in most cases it is the white wire. (the black or red wire is the hot and the bare wire is the ground.)
Shield is ground. White is Neutral, center tap of the transformer from the power company.
Hard Black Wire
Out of pebbles and other materials. The black pebbles were usually used as out lining and more towards A.D Greeks started using wire.
Wire, iron and steel.
medla wire and chickemn
Black electrical wire is used for power in all circuits. Any circuit's black wire should be considered hot or live. Black wire is never used for a ground or neutral wire and should be used as the power feed for a switch or an outlet. A black wire is often used in a circuit as a switch leg, the connection that runs from the switch to the electrical load. Red electrical wire indicates the secondary live wires in a 220-volt circuit, used in some types of switch legs and in the interconnection between smoke detectors that are hard-wired into the power system. You can connect a red wire to another red wire or to a black wire.
some new materials that are used in making jewellery today is beads, wire, and pliers
No. Green should always signify the ground wire.
Conventionally, the black wire is used for negative voltages. In an automotive car and certain other places like hooking up a car stereo then it would be the negative. The electrical appliances in the house.The black wire would be the hot wire and the white wire would be the negative wire.
No, there are different occasions when the red of a three wire cable gets used as a hot wire. There also times when the white wire gets used as a hot but has to be re identified as a hot with marking tape. When wiring baseboard heaters the cable used is red and black with no white wire in the set.
Black wire? You mean black insulation? If so, a black insulated wire would generally be a non-grounded conductor (preferably the hot line) and should not be connected to ground anywhere. However, someone may have improperly used a black wire for grounding, rather than green wire (or green/yel wire), or forgotten to wrap it with green tape.
For steel, flux core or hard wire with Argon/CO2 is used with the GMAW process.
Amadee Bender has written: 'Hard and superhard materials' -- subject(s): Carbide industry, Ceramic industries, Diamond industry and trade, Hard materials, Market surveys, Steel alloy industry 'Growth opportunities in wire & cable' -- subject(s): Electric wire and cable industry, Market surveys