No risk just make sure head is not warped before replacing gasket Is this a quad 4 motor????????????????????
Could be a bad head gasket.
Yes there are sealers out there that can be used to seal or repair the gasket
15.00. for gasket and thermostat
No. You need to remove the head(s) and have the head(s) checked for cracks and straightness, then install the head(s) with new head gaskets. Most head gasket manufactured are assembled dry, no sealants.
Changing a valve cover gasket really has nothing to do with an engine starting or not. You need to check your power and gas for problems in starting.
how many hours to remove oil pan gasket 1995 Pontiac
You pull the head off and change the head gasket. There is no treatment for a blow gasket, exept changing it. Its a pretty huge job I would suggest getting it at the garage and get a quote.
I have a 2002 Pontiac Gramd Am and its in the shop right now getting the Intake Manifold Gasket fixed on it! Its about $2000 with labor costs and everything! Rediculous! Its supposidly VERY common in these vehicles....They should do a re-call!
Replace the gasket with a new one.
yes, they are known for getting over 300,000 miles on them!
You don't
Can be many things, but considering you just changed the intake gasket, I would suspect you did it incorrectly or have knocked a vacuum hose loose somewhere. You have a vacuum leak somewhere.
how to replace a distributor gasket on a 2000 Pontiac grand am 3.4l
intake manifold gasket is leaking and water is getting on the plugs, plastic piece melts and causes leak
5900 to include changing the head due to warp. Without the head take 1600 off
yes you have to change the pan gasket when doing the timing chain
I was having a problem with my intake manifold gasket on my 2003 Pontiac grand am and i took it to a shop it was 600 dollars parts and labor you can get it much cheaper i just chose a mechanic i could trust. now it may not be intake manifold gasket the best way to tell is to lift your oil cap look at the backside of it and if there is a blueish tint liquid on the cap then your getting condensation which means bad intake gasket. But it can also be your thermostat housing messing up which would be much cheaper.