A standard Micrometer using the Metric system has a limitation of measuring to within 0.01 (one hundredth of a millimeter)
But micrometers provided with a vernier scale on the sleeve in addition to the regular graduations, permit measurements to within 0.001 millimetre to be made on metric micrometers, or 0.0001 inches on inch-system micrometers.
LC FOR VERNIER CALIPER-0.1mm LC FOR MICROMETER -0.01 mm L.C- NO OF SMALLEST DIVISION ON MAIN SCALE ------------------------------------------------------- TOTAL NO OF DIVISION ON VERNIER SCALE
there is a big different between the vernier caliper and micro meter caliper,the vernier caliper they can use the outside and inside measurement while the micro meter caliper it's just only use outside measurement..
A micrometer is more accurate but it is only suitable for very small objects. For example, you could not measure the length of a credit card to any degree of accuracy using a standard micrometer.
It is not known for certain but vernier callipers were found in a Greek wreck where the ship was dated to the 6th Century BC.
.001
micrometer conforms to abbe's principle because the graduations are located along the same axis as the measurement while vernier caliper does not because the graduations are not on the same axis as the measurement.
Vernier calipers are used to measure length when quite accurate measurement is required, but not such accuracy as to require a micrometer.
micrometer is more occurate.
yes,probably we will get accurate measurement.
A vernier caliper would be a good way, unless you need a more accurate measurement, in which case I might use a micrometer caliper.
*Micrometer have a rotary handle and whereas vernier have a slider. *Micrometer is for measuring diameters while vernier is for measuring inside & outside diameter as well as depth. *Least Count of Vernier Caliper is 0.02mm *Least Count of Micrometer is 0.01mm
Micrometer or vernier caliper
vernier-caliper
In case for micrometer, principle of pitch is used. Least count could be even micro meter But in vernier caliper, difference of main scale division and vernier scale division is the principle Least count could be 0.02 mm
It is less than a micrometer but greater than a non vernier caliper or ruler.
It is less than a micrometer but greater than a non vernier caliper or ruler.
My mooom and the advantage in meausurung with vernier caliper and the micro meter is grams mass length volume and all that measuring stuff